Cooling...any suggestions???

[tea217]

AV7133 and Tbird900mhz.... 9.0 x 133mhz = 1.2Ghz

What cooling would u recommend??
(any fan not over $100dollar is ok...but hope is not too expensive)

thx!

 

[mechBgon]

I would go with an Alpha PEP66 with a YSTech 60x25mm fan, or another fan over 25CFM. www.millisec.com has the YSTech/PEP66 combo.

 

[dingdongdingdong]

Tea217 seen I see overclock forum asking people about imformation how to overclock 1gig@1.33 so than why not go get 1.2gig cpu and get this hsf hsf for the same amount of money 1gig+80dollar hsf 😉(note this hsf are very loud)by the way what kind of mobo are using so i can help you find out more about hsf k

 

[tea217]

dingdong...
my mobo is A7V133...if i get a 12gig cpu,..i can't run my FSB at 133mhz..
I heard ppl say 9.0x133=1.2ghz is Better than 12x100mhz...rite..??

thx !!

BTW, would you recommend the Alpha PEP66T or Alpha PAL6035MFC...?

 

[dingdongdingdong]

you can run 133fsb and the 1.2gig can overclock atleast 1.4gig at i know. the same amount of money you spend on hsf and cpu so 1.2gig cpu you can not go wrong with it😉 by the way go to this forum asking some guy there and they will help ya . most ppl in that forum are nut shell about air cool. link another one in canada so you can order them😉canada store

 

[tea217]

Just curious..
1)900mhz cpu....9.0x133mhz
2)1200mhz cpu...lowered to 9.0x133mhz..
Will the latter configuration produce less heat since the cpu can handle 1.2gig but i lowered the multiplier to 9.0

 

[chasm22]

I think it would depend on the core speed and the core voltage.



"1)900mhz cpu....9.0x133mhz
2)1200mhz cpu...lowered to 9.0x133mhz..
Will the latter configuration produce less heat since the cpu can handle 1.2gig but i lowered the multiplier to 9.0"

 

[Bartman39]

The voltage would be the main factor in the heat problem... A 1.2 Tbird would or should run cooler, also I would lean to an Alpha 6035 for less mass and ease of installation...

 

[HL]

Has anyone ever tried the Swifttech MC462 only replacing the loud 80mm Delta fan with a 80mm sunon high speed to keep the noise down? I've seen a few sites that sell the MC462 without a fan.

 

[tea217]

"I think it would depend on the core speed and the core voltage."
hmm....what is the "core speed" ???

Maybe i'm stupid or something,..but i still don't understand the answer to my question..
"1)900mhz cpu....9.0x133mhz
2)1200mhz cpu...lowered to 9.0x133mhz..
Will the latter configuration produce less heat since the cpu can handle 1.2gig but i lowered the multiplier to 9.0"

So..YES produce less heat,..or NO same amount of heat??

 

[Mikewarrior2]

Assuming same voltage, the amount of heat output difference should be minimal.


Mike