• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

comp wont post

F

figurehead

Junior Member
i built this computer im on right now without a single problem. but i decided i wanted to upgrade my old computer a little. heres whats going on

used all the parts like dvd rom, 3 fans, floppy disc and 20 gig hard drive (fujitsu brand, unformatted) from the old computer
all the new parts are the 300w psu, pny gforce2 400mx, pc2100 ddr, mobo and cpu. its a 1.7m p4 cpu with a via p4x-266 mainboard
i put everything in the same way that i did on this computer. also i put thermal paste on the cpu so it wouldnt get fried.

i plug in everything and start it up. the comp doesnt post, it doesnt go to bios and the keyboard doesnt work. i have power to the fans, floppy drive, heatsink and dvd rom. i have switched all the parts, except the cpu, mobo and psu, into this computer to see if they worked and they did.

whats going on? did i short out the mobo or cpu? bad psu or not enough power?
 
Also, clear the BIOS, use the jumper settings and pull the battery out. Wait for a while, I heard up to 30 minutes and less.

Along with what SemperFi said, with the video card, memory, and cpu, but just have those plugged in, unplug the HDD, DVD, etc. just have those 3 componets in.
 
did all that and it still wont post. everything had power. so its now either the cpu (please god no) or the mobo. i know the ram works cause i put it in this computer to make sure.

any other suggestios or am i pretty much gonna have to buy a new mobo or cpu?
 
Try to borrow a PS from a friend and test it. Also who makes your PS? Wattage? Amps on 3.3V rail and 5 V rail? Should be on a sticker on the side of the PS.
 
antech model pp-303xp 300watt power supply
amp on 3.3 volt rail = 20
amp on 5 volt rail = 50

set at 115 volts not at 230

it says that it has enough power to supply a p4 and 1.7 and up

ive also tried 2 power supplies (spare parts all around this place). both worked fine before i decided to upgrade
 
did you install the brass standoffs correctly? did you make sure they aren't thouching somewhere on the motherboard besides the holes?
 
yep done all those steps and still no. i guess the mobo has been shorted somehow

time to try another mobo. and if i decide not to do that, the case will make a lovely ashtray

thanks for the help guys.
 
i got it fixed. it didnt want to go a new mobo so i took it apart and put it back together for the third time. but i this time i put some scotch tape ontop of the brass standoffs. thats the only thing that i did different this time. i powed up and it worked.

thanks again for all the help
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top