• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Battery on CMOS fault

S

steve wilson

Senior member
Hi,
I have a computer at work and the battery keeps failing on the CMOS. I've replaced twice in the space of a year. Is it most likely a faulty motherboard?
 
Could be.

Probably a stupid question, but were are you getting your replacement batteries? Have you tried a different brand?
 
I got the batteries from a local jeweler. But the original battery in their came with the computer and that must of been from a different supplier (well 99.9999% sure). This will be the 4th different battery going in.
 
If you could insert an ammeter in series with the battery, you can find out if too much current is being pulled from it.

How much time does this computer spend without power?
 
sm625 said:
If you could insert an ammeter in series with the battery, you can find out if too much current is being pulled from it.

How much time does this computer spend without power?
Click to expand...

It is always plugged into the mains, but the computer is probably switched on for around 2-4 hours a day, Monday to Friday.

I have no experience with an ammeter ... how would I go about that?
 
If it is always plugged into the mains then it shouldnt matter. Even when the PC is off, the standby circuit should be providing power from the mains. The mains power should be setting and holding the voltage at the battery terminal, preventing the battery from discharging at all.
 
sm625 said:
If it is always plugged into the mains then it shouldnt matter. Even when the PC is off, the standby circuit should be providing power from the mains. The mains power should be setting and holding the voltage at the battery terminal, preventing the battery from discharging at all.
Click to expand...

True. It makes me wonder if the power supply might be malfunctioning.
 
I'm not sure how it could malfunction to produce such a failure. Even if the powered on voltage to the cmos circuit was lower than the battery voltage, the battery would jsut discharge until the voltages equalized. We know this voltage cannot be too low or else it wouldnt work at all. If the power supply to cmos was too low then the computer would cease functioning as soon as you pulled the battery out or until the battery died.
 
if you've gone through several batteries, and they always fail shortly after putting them in... and assuming they are the correct type of battery, then i would think one of 2 things to be the problem

1) motherboard circuitry at fault... how old in the board? do you see signs of age (bulging caps, etc?)

2) there is a short between the board and the case standoff... pull the board and make sure they all line up with the install holes, etc..
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top