• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Asus P5K and Memory Combo Suggestions

ajschmitt

Junior Member
I am building a P5K system with 4G of memory and am looking for a 2x2G product that will work with the board. Any suggestions?
 
Hey ajschmitt,

I downloaded the manual and in there it says;
"If you install four 1 GB memory modules, the system may only recognize less than 3GB because the address space is reserved for other critical functions. This limitation appears on Windows XP/Vista 32-bit operation system which does not support Physical Address Extension (PAE)."
"If you install Windows XP/Vista 32-bit operation system, a total memory of less then 3GB is recommended."

Of course there could be away around this, I am planning on doing a P5K build as well and would like to get 4 gigs in there myself. I will let you know if I find anything else.
 
Originally posted by: opulent
Hey ajschmitt,

I downloaded the manual and in there it says;
"If you install four 1 GB memory modules, the system may only recognize less than 3GB because the address space is reserved for other critical functions. This limitation appears on Windows XP/Vista 32-bit operation system which does not support Physical Address Extension (PAE)."
"If you install Windows XP/Vista 32-bit operation system, a total memory of less then 3GB is recommended."

Of course there could be away around this, I am planning on doing a P5K build as well and would like to get 4 gigs in there myself. I will let you know if I find anything else.

4 gigs and up addressable by 64bit versions 🙂
 
have you guys picked up your P5K boards yet?
i got mine last friday and built it friday night, ive noticed i get occasional hangs in windows for no reason if i leave it alone for 15mins or so.... just no response at all.. ive got all the latest xp updates, bios flash and drivers - all bios settings are stock apart from memory @ 1066 and its in an Antec 900 so it wont be overheating..

any other settings i might wanna check?? the power options are set to stay on forever
 
I bought the P5K with G.Skill 4-4-4-12 800Mhz Memory and 8800GTX and it is rock-rock solid with Vista 64.

I would run at 800Mhz or less and not overclock and see if that solves it.
 
hmmm i'll try leaving the memspeed to 800, but i do have Kingston HyperX PC8500 so I wouda thought 1066 should be reasonable???? CPU is an E6600 as well

 
Check out my sig for my build. I did not change anything in the bios and everything is solid. No hangups and ran EQ2 on max settings for 12+hrs no crashing. Was kinda slow due to vid card so notched it down. Waiting till the 8900 comes out for vid upgrade.


good luck, love my P5k.

BF
 
Back
Top