• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

applying paste on A64

Just spread it on like jam on toast. Or you can go with the normal task of putting a rice sized amount of paste in the centre of the processor or IHS.
 
It really depends on the particular paste you're using. As others have mentioned, a thin layer of AS5 spread over the full IHS works fine. However, a really thick paste like MX-1 can't be spread easily, and putting a small droplet in the center works best.
 
i have a question...how exactly do you apply the paste? do you just put a drop in the center and use your finger to spread it around? or do you use a blade or something to spread it?
 
Originally posted by: DarkManX4lf
i have a question...how exactly do you apply the paste? do you just put a drop in the center and use your finger to spread it around? or do you use a blade or something to spread it?
Click to expand...

If your applying it to the IHS, then just put a rice grain size of paste in the centre and let the pressure of the heatsink spread it out, once secured. Once that heatsink is secure give it a little twist from left to right to get any trapped air out, and also to aid in even distribution.

If applying it to the naked core itself, then use a razor blade to evenly distribute the paste over the core. Keeping in mind you are looking for a very thin layer, as the paste is just a means to fill in the microscopic discrepancies in the flat surfaces of both the core, IHS and heatsink. If you apply too much you might get a negative effect on heat transfer, as it might blanket its ability to transfer heat.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top