• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Abit IS7 problem

K

KVA

Junior Member
A few days ago I have ordered on Newegg Abit IS7, P4 2.4c, 2x256 Crucial 3200 RAM, Prolink Ti4200 and Antec SLK3700, put it together and ... nothing. Fans are running, LEDs on board are on (one green, one red), no sound on the boot and no output to display. 🙁 I was able to check video card (it's fine), but cannot check the rest of components. CPU looks kinda fine, at least it is getting hot (checked cooler).

Is there something I can do before exchanging motherboard? Could I miss something assembling system?
 
Try running the board outside of the case. Also, make sure your CPU fan is plugged in (some boards won't POST if a fan isn't detected) and make sure the auxiliary 4 pin square power connector is attached. Also, try running it without RAM or video card, to see if you can induce error beeps.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top