- Feb 18, 2002
- 9
- 0
- 66
System Configuration:
Motherboard: ASRock X570 PHANTOM GAMING 4
CPU: AMD RYZEN 5 3600
Memory: CORSAIR Vengeance LPX 16GB (2 x 8GB) DDR4 DDR4 3200
GPU: SAPPHIRE PULSE Radeon RX 5700 XT
VBIOS: 113-1E4112U-O45
Driver: 20.4.1
OS: Windows 10 x64 (18363.720)
Monitors: 3x Acer S231HL
One monitor connected with a HDMI cable. Two other monitors connected with passive DVI to display port adapters.
For the initial build, I did not reformat my SSD, just updated drivers. All three monitors worked as expected, I was able to set up an eyefinity group and play Iracing without issue over the weekend. Today, since I'm working from home, I unhooked the HDMI cable from my desktop and plugged it into my work laptop for work today. Then after work, I plugged the HDMI cable back into my desktop, and turned the computer on (My desktop was off all day, so it was never turned on with the HDMI monitor unhooked). When I turned it on, only one (a DVI to DP) monitor worked. The other two screens stayed black. I rebooted, unplugged cables, etc and got all three monitors working again. The only issue is that the monitor with the HDMI cable is stuck in 640x480 resolution. I can swap cables around between my monitors and the one with the HDMI cable is stuck in the low resolution while the others work. Also swapped HDMI cable with no improvement.
So then I thought maybe it was related to not reformatting and starting with a fresh windows install. So I did that and am still having the same issues. I also updated the chipset drivers.
Any ideas? Or anything else I should try?
Motherboard: ASRock X570 PHANTOM GAMING 4
CPU: AMD RYZEN 5 3600
Memory: CORSAIR Vengeance LPX 16GB (2 x 8GB) DDR4 DDR4 3200
GPU: SAPPHIRE PULSE Radeon RX 5700 XT
VBIOS: 113-1E4112U-O45
Driver: 20.4.1
OS: Windows 10 x64 (18363.720)
Monitors: 3x Acer S231HL
One monitor connected with a HDMI cable. Two other monitors connected with passive DVI to display port adapters.
For the initial build, I did not reformat my SSD, just updated drivers. All three monitors worked as expected, I was able to set up an eyefinity group and play Iracing without issue over the weekend. Today, since I'm working from home, I unhooked the HDMI cable from my desktop and plugged it into my work laptop for work today. Then after work, I plugged the HDMI cable back into my desktop, and turned the computer on (My desktop was off all day, so it was never turned on with the HDMI monitor unhooked). When I turned it on, only one (a DVI to DP) monitor worked. The other two screens stayed black. I rebooted, unplugged cables, etc and got all three monitors working again. The only issue is that the monitor with the HDMI cable is stuck in 640x480 resolution. I can swap cables around between my monitors and the one with the HDMI cable is stuck in the low resolution while the others work. Also swapped HDMI cable with no improvement.
So then I thought maybe it was related to not reformatting and starting with a fresh windows install. So I did that and am still having the same issues. I also updated the chipset drivers.
Any ideas? Or anything else I should try?