2-bay external SCSI enclosure for $12.50 + shipping

[Steven the Leech]

Im sitting here looking at mine Had to spend 30.00 for the cables to get it hooked up, but for 42.50 I have a nice case to house my cdr and cd rom. Required some research to find the cables, since no local computer shop has scsi hw in stock, but after looking i found what i needed.

 

[CocaCola5]

Is the DB50 connector the one that looks like a parallel port? I want to get it but not sure, have a 68pin external UW connector and a basic scsi connector that looks like a parallel port both don't look like they would work with this unit. I know the HD50 will not work with the 68 uw.

 

[Steven the Leech]

hpdb50/idc50 f/m xt/int w bracket

can be found Here

and Here

"item 10P1-02106 and 31P1-10300"

I have a 50f IDC cable going from my adaptic 2940u2w to my dvd then to the int/ext adapter. works fine

 

[vladgur]

Those of you who received these enclosures, did you figure out how to connect SCSI id selectors to either of the SCSI devices. In the enclosure I got, there are 2 sets of wires, each with four connectors: 4-holes, 4-holes, 3-holes and 3-holes. My Scsi cd-roms have 3 jumpers for ID selections(6 pins) and some other jumpers for stuff like termination etc. I cant figure out, how to attach the scsi id selectors from the case to the SCSI CDRs ....HELP

 

[dr0p0ut]

not sure if this will help you. but i did not connect any of those id wire
to my cdrom and burner. i asign id number through the jumper on the drive. like you i did not find any place to put those wire into