1700+ 0310WPMW OC HELP

Toggle sidebar Toggle sidebar
C

Corporate Thug

Lifer
Apr 17, 2003
37,622
0
76
i'm having some trouble ocing with this chip. if anyone has this chip and an NF7-s, please post your OC and details (FSB, multipler, temp, heatsink) thanx
 
B

bgeh

Platinum Member
Nov 16, 2001
2,946
0
0
Athlon XP 1700+@2.33GHz(14 x 166)@1.75v(actual)
Abit NF7-S Rev 1.2
Temp-56 load(running F@H all the time)
Heatsink-Volcano 7+ set on high
Mem Voltage 2.675v(minimum on mobo is 2.6v+0.075 overvolting)
Chipset Voltage-Default(1.6v)
 
I

INGlewood78

Senior member
Dec 22, 2002
939
0
71
1700+ 0310WPMW @ 2.3ghz (200x11.5), 1.7v(actual 1.68v)
Abit NF7-S Rev 2.0 (bios..1.2)
GEIL PC3500 (2x512)...2,3,3,6...2.8v (dual channel)
Volcano 7+ on low (have a vantec stealth fan blowing from a hole on the side of the case)
Idle 45C
Primed 51C
chipset voltage is default...forgot what it is though

happy overclocking!
 
C

Corporate Thug

Lifer
Apr 17, 2003
37,622
0
76
Originally posted by: INGlewood78
1700+ 0310WPMW @ 2.3ghz (200x11.5), 1.7v(actual 1.68v)
Abit NF7-S Rev 2.0 (bios..1.2)
GEIL PC3500 (2x512)...2,3,3,6...2.8v (dual channel)
Volcano 7+ on low (have a vantec stealth fan blowing from a hole on the side of the case)
Idle 45C
Primed 51C
chipset voltage is default...forgot what it is though

happy overclocking!
Click to expand...

Is 1.2 the new bios? also, does a bios flash do anything for overclocking? thanx

 
I

INGlewood78

Senior member
Dec 22, 2002
939
0
71
I think 1.4 is the newest one...but I read about a lot of problems with it so I decided not to update. One of bios 1.2 fixes is that it will display dual channel mode (if u have it) during startup. From what I read...it seems that bios updates will affect your overclock. Sometimes you get better overclocks...sometimes worse...as with the case of 1.4. Maybe you should flash to 1.2 to see how it might help. Dont flash 1.4...too many problems out there associated with it. Whats your setup?...maybe I can help...
 
C

Corporate Thug

Lifer
Apr 17, 2003
37,622
0
76
NF7-s v2
1700+ 0310 DLT3C WMPW
512 Corsair XMS pc3200
9700 pro
slk800 with SF II
wd 100 GB se
pionner A05
onboard sound

i'm hesitant to flash the bios, as i have never done it before. thanx
 
I

INGlewood78

Senior member
Dec 22, 2002
939
0
71
Originally posted by: shady06
NF7-s v2
1700+ 0310 DLT3C WMPW
512 Corsair XMS pc3200
9700 pro
slk800 with SF II
wd 100 GB se
pionner A05
onboard sound

i'm hesitant to flash the bios, as i have never done it before. thanx
Click to expand...


You have some good stuff....let me see...ur ram is better and ur HSF is better...I cant see why u wouldnt be able to get to at least where I am...what seems to be the problem with ur overclock?...I was also very hesitant to flash the bios..but its really easy...the NF7-S manual has some good directions...i think better than what i can explain online...seems like the only difference is our bios..but even before i flashed it...i was able to do 2.2 ghz at 1.6v.
 
I

INGlewood78

Senior member
Dec 22, 2002
939
0
71
i just read ur other post...looks like ur overclock is normal...very much similar to mines...what problems are u talking about?
 
S

screw3d

Diamond Member
Nov 6, 2001
6,906
1
76
I don't have the nf7-s, but my WPMW hits 2.4GHz @ 1.725v, 50 deg C loaded, 30 deg C ambient. SETI@home running 24/7.

I had it running fine at 1.7v, but it BSODed after 2 days. Even then I think it's has more to do with the 2.42 nForce2 drivers.
 
I

INGlewood78

Senior member
Dec 22, 2002
939
0
71
I would try for 2.4+ghz if not for my POS HSF...I could probably do it with the fan set to high, but I would go insane in a couple of days. The volcano 7+ on high fan speed sounds like a plane getting ready to take off!........
 
B

bgeh

Platinum Member
Nov 16, 2001
2,946
0
0
Originally posted by: INGlewood78
I would try for 2.4+ghz if not for my POS HSF...I could probably do it with the fan set to high, but I would go insane in a couple of days. The volcano 7+ on high fan speed sounds like a plane getting ready to take off!........
Click to expand...

yup, but i need high or else it will go past 60c load
 
I

INGlewood78

Senior member
Dec 22, 2002
939
0
71
What is ur bios version...the new one is suppose to correct the temp probe readings....supposely the temps on old bios are 7-10 C over the actual....so maybe 60C is not so bad
 
S

Shimmishim

Elite Member
Feb 19, 2001
7,504
0
76
Originally posted by: marvie
I don't have the nf7-s, but my WPMW hits 2.4GHz @ 1.725v, 50 deg C loaded, 30 deg C ambient. SETI@home running 24/7.

I had it running fine at 1.7v, but it BSODed after 2 days. Even then I think it's has more to do with the 2.42 nForce2 drivers.
Click to expand...

uninstall the 2.42 drivers... nvidia has recalled them.. check out their webpage ... they put up the 2.03 again

btw...

i don't believe in this burningin crap but... i am now running this chip at 2.5 ghz @ 12.5 x 200 at 1.81 actual volts and a load temp of 43.5C's with the new 1.4 bios

seems like the performance of my system has decreased since the 1.1 bios though... oh well....
 
B

bgeh

Platinum Member
Nov 16, 2001
2,946
0
0
Originally posted by: Shimmishim
Originally posted by: marvie
I don't have the nf7-s, but my WPMW hits 2.4GHz @ 1.725v, 50 deg C loaded, 30 deg C ambient. SETI@home running 24/7.

I had it running fine at 1.7v, but it BSODed after 2 days. Even then I think it's has more to do with the 2.42 nForce2 drivers.
Click to expand...

uninstall the 2.42 drivers... nvidia has recalled them.. check out their webpage ... they put up the 2.03 again

btw...

i don't believe in this burningin crap but... i am now running this chip at 2.5 ghz @ 12.5 x 200 at 1.81 actual volts and a load temp of 43.5C's with the new 1.4 bios

seems like the performance of my system has decreased since the 1.1 bios though... oh well....
Click to expand...

wow, nice OC for such a low voltage
 
S

screw3d

Diamond Member
Nov 6, 2001
6,906
1
76
Originally posted by: Shimmishim
Originally posted by: marvie
I don't have the nf7-s, but my WPMW hits 2.4GHz @ 1.725v, 50 deg C loaded, 30 deg C ambient. SETI@home running 24/7.

I had it running fine at 1.7v, but it BSODed after 2 days. Even then I think it's has more to do with the 2.42 nForce2 drivers.
Click to expand...

uninstall the 2.42 drivers... nvidia has recalled them.. check out their webpage ... they put up the 2.03 again

btw...

i don't believe in this burningin crap but... i am now running this chip at 2.5 ghz @ 12.5 x 200 at 1.81 actual volts and a load temp of 43.5C's with the new 1.4 bios

seems like the performance of my system has decreased since the 1.1 bios though... oh well....
Click to expand...

I know about nVidia's recall but I'm just too lazy to do it since it's not really giving me any problems and I just did a reformat coz of the 2.42 too :frown: If I were to uninstall the drivers I think it would gimme some problems.

Directly quoted from nVidia's "Recovery Instructions":

Case 3
Your system is unbootable because you tried to use Add/Remove programs on the nForce 2.42 driver kit

d@mn!
 
M

MachoDonut

Member
Apr 28, 2003
61
0
0
Originally posted by: INGlewood78
I think 1.4 is the newest one...but I read about a lot of problems with it so I decided not to update. One of bios 1.2 fixes is that it will display dual channel mode (if u have it) during startup. From what I read...it seems that bios updates will affect your overclock. Sometimes you get better overclocks...sometimes worse...as with the case of 1.4. Maybe you should flash to 1.2 to see how it might help. Dont flash 1.4...too many problems out there associated with it. Whats your setup?...maybe I can help...
Click to expand...

Flashed to 1.4 and have no problems. It also fixes the problem with temps reporting high. It didn't hurt my overclock at all.
 
S

Shimmishim

Elite Member
Feb 19, 2001
7,504
0
76
i'm getting problems with the new bios :(

12.5 x 200 rebooted on me last night while i was IMing with a friend... i got the BSOD with two errors...

anyway.... i had to go back down to 12 x 200 cuz 11.5 x 210 isn't stable anymore either at the same 1.8 volts

dang it! that's what i get for wanting a lower temperature reading!!! :)
 
C

Corporate Thug

Lifer
Apr 17, 2003
37,622
0
76
the nvidia drivers are not the problem. i never installed the new ones


todays temps: 47C idle at stock voltage with side panel off :Q
 
C

Corporate Thug

Lifer
Apr 17, 2003
37,622
0
76
nope, i made a post on the general hardware forum. debating whether or not it can be done with a dvd burner as boot device. any idea shim?
 
You must log in or register to reply here.

TRENDING THREADS

COMPANY
RESOURCES
FOLLOW
Top Bottom