• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

1700+ 0310WPMW OC HELP

C

Corporate Thug

Lifer
i'm having some trouble ocing with this chip. if anyone has this chip and an NF7-s, please post your OC and details (FSB, multipler, temp, heatsink) thanx
 
Athlon XP 1700+@2.33GHz(14 x 166)@1.75v(actual)
Abit NF7-S Rev 1.2
Temp-56 load(running F@H all the time)
Heatsink-Volcano 7+ set on high
Mem Voltage 2.675v(minimum on mobo is 2.6v+0.075 overvolting)
Chipset Voltage-Default(1.6v)
 
1700+ 0310WPMW @ 2.3ghz (200x11.5), 1.7v(actual 1.68v)
Abit NF7-S Rev 2.0 (bios..1.2)
GEIL PC3500 (2x512)...2,3,3,6...2.8v (dual channel)
Volcano 7+ on low (have a vantec stealth fan blowing from a hole on the side of the case)
Idle 45C
Primed 51C
chipset voltage is default...forgot what it is though

happy overclocking!
 
Originally posted by: INGlewood78
1700+ 0310WPMW @ 2.3ghz (200x11.5), 1.7v(actual 1.68v)
Abit NF7-S Rev 2.0 (bios..1.2)
GEIL PC3500 (2x512)...2,3,3,6...2.8v (dual channel)
Volcano 7+ on low (have a vantec stealth fan blowing from a hole on the side of the case)
Idle 45C
Primed 51C
chipset voltage is default...forgot what it is though

happy overclocking!
Click to expand...

Is 1.2 the new bios? also, does a bios flash do anything for overclocking? thanx

 
I think 1.4 is the newest one...but I read about a lot of problems with it so I decided not to update. One of bios 1.2 fixes is that it will display dual channel mode (if u have it) during startup. From what I read...it seems that bios updates will affect your overclock. Sometimes you get better overclocks...sometimes worse...as with the case of 1.4. Maybe you should flash to 1.2 to see how it might help. Dont flash 1.4...too many problems out there associated with it. Whats your setup?...maybe I can help...
 
NF7-s v2
1700+ 0310 DLT3C WMPW
512 Corsair XMS pc3200
9700 pro
slk800 with SF II
wd 100 GB se
pionner A05
onboard sound

i'm hesitant to flash the bios, as i have never done it before. thanx
 
Originally posted by: shady06
NF7-s v2
1700+ 0310 DLT3C WMPW
512 Corsair XMS pc3200
9700 pro
slk800 with SF II
wd 100 GB se
pionner A05
onboard sound

i'm hesitant to flash the bios, as i have never done it before. thanx
Click to expand...


You have some good stuff....let me see...ur ram is better and ur HSF is better...I cant see why u wouldnt be able to get to at least where I am...what seems to be the problem with ur overclock?...I was also very hesitant to flash the bios..but its really easy...the NF7-S manual has some good directions...i think better than what i can explain online...seems like the only difference is our bios..but even before i flashed it...i was able to do 2.2 ghz at 1.6v.
 
i just read ur other post...looks like ur overclock is normal...very much similar to mines...what problems are u talking about?
 
I don't have the nf7-s, but my WPMW hits 2.4GHz @ 1.725v, 50 deg C loaded, 30 deg C ambient. SETI@home running 24/7.

I had it running fine at 1.7v, but it BSODed after 2 days. Even then I think it's has more to do with the 2.42 nForce2 drivers.
 
I would try for 2.4+ghz if not for my POS HSF...I could probably do it with the fan set to high, but I would go insane in a couple of days. The volcano 7+ on high fan speed sounds like a plane getting ready to take off!........
 
Originally posted by: INGlewood78
I would try for 2.4+ghz if not for my POS HSF...I could probably do it with the fan set to high, but I would go insane in a couple of days. The volcano 7+ on high fan speed sounds like a plane getting ready to take off!........
Click to expand...

yup, but i need high or else it will go past 60c load
 
What is ur bios version...the new one is suppose to correct the temp probe readings....supposely the temps on old bios are 7-10 C over the actual....so maybe 60C is not so bad
 
Originally posted by: marvie
I don't have the nf7-s, but my WPMW hits 2.4GHz @ 1.725v, 50 deg C loaded, 30 deg C ambient. SETI@home running 24/7.

I had it running fine at 1.7v, but it BSODed after 2 days. Even then I think it's has more to do with the 2.42 nForce2 drivers.
Click to expand...

uninstall the 2.42 drivers... nvidia has recalled them.. check out their webpage ... they put up the 2.03 again

btw...

i don't believe in this burningin crap but... i am now running this chip at 2.5 ghz @ 12.5 x 200 at 1.81 actual volts and a load temp of 43.5C's with the new 1.4 bios

seems like the performance of my system has decreased since the 1.1 bios though... oh well....
 
Originally posted by: Shimmishim
Originally posted by: marvie
I don't have the nf7-s, but my WPMW hits 2.4GHz @ 1.725v, 50 deg C loaded, 30 deg C ambient. SETI@home running 24/7.

I had it running fine at 1.7v, but it BSODed after 2 days. Even then I think it's has more to do with the 2.42 nForce2 drivers.
Click to expand...

uninstall the 2.42 drivers... nvidia has recalled them.. check out their webpage ... they put up the 2.03 again

btw...

i don't believe in this burningin crap but... i am now running this chip at 2.5 ghz @ 12.5 x 200 at 1.81 actual volts and a load temp of 43.5C's with the new 1.4 bios

seems like the performance of my system has decreased since the 1.1 bios though... oh well....
Click to expand...

wow, nice OC for such a low voltage
 
Originally posted by: Shimmishim
Originally posted by: marvie
I don't have the nf7-s, but my WPMW hits 2.4GHz @ 1.725v, 50 deg C loaded, 30 deg C ambient. SETI@home running 24/7.

I had it running fine at 1.7v, but it BSODed after 2 days. Even then I think it's has more to do with the 2.42 nForce2 drivers.
Click to expand...

uninstall the 2.42 drivers... nvidia has recalled them.. check out their webpage ... they put up the 2.03 again

btw...

i don't believe in this burningin crap but... i am now running this chip at 2.5 ghz @ 12.5 x 200 at 1.81 actual volts and a load temp of 43.5C's with the new 1.4 bios

seems like the performance of my system has decreased since the 1.1 bios though... oh well....
Click to expand...

I know about nVidia's recall but I'm just too lazy to do it since it's not really giving me any problems and I just did a reformat coz of the 2.42 too :frown: If I were to uninstall the drivers I think it would gimme some problems.

Directly quoted from nVidia's "Recovery Instructions":

Case 3
Your system is unbootable because you tried to use Add/Remove programs on the nForce 2.42 driver kit

d@mn!
 
Originally posted by: INGlewood78
I think 1.4 is the newest one...but I read about a lot of problems with it so I decided not to update. One of bios 1.2 fixes is that it will display dual channel mode (if u have it) during startup. From what I read...it seems that bios updates will affect your overclock. Sometimes you get better overclocks...sometimes worse...as with the case of 1.4. Maybe you should flash to 1.2 to see how it might help. Dont flash 1.4...too many problems out there associated with it. Whats your setup?...maybe I can help...
Click to expand...

Flashed to 1.4 and have no problems. It also fixes the problem with temps reporting high. It didn't hurt my overclock at all.
 
i'm getting problems with the new bios 🙁

12.5 x 200 rebooted on me last night while i was IMing with a friend... i got the BSOD with two errors...

anyway.... i had to go back down to 12 x 200 cuz 11.5 x 210 isn't stable anymore either at the same 1.8 volts

dang it! that's what i get for wanting a lower temperature reading!!! 🙂
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top