Recent content by ntrights

probably your ram thats limiting you then!!!! you should be able to hit somewhere between 3.3-3.6 GHz on DEFAULT voltage....;)

Change PSU!! Also look over your cooling. I wouldn't be comfortable with anything above 64C for 100% stability 24/7 Mine does 2.66@3.90 (FSB195) 1.5Gig Mushkin Black label&Xtreem 500MHz (Winbond BH-5 chips) idle 36C, Full load dual prime 62C Watercooled

Merom is the successor to Yonah with a better performance per watt ratio and also with added features such as Vanderpool Virtualization Technology and EM64T. Conroe is the desktop version of Merom. Basically the difference between Merom and Conroe is the FSB. see the numbers below...

Hi, anyone know if there will be a dualcore adapter like the ASUS CT479 that supported dothan processor? Since Core Duo and Core Solo use an FCPGA6 (478-pin) pinout (but with a diffrent pin arrangement then pentium m, centrino mobos)..should be possible!!

7800 cards should be faster. GeForce Go 7800 GTX GeForce Go 7800 Graphics Bus Technology PCI Express PCI Express Memory Interface 256-bit 256-bit Memory Bandwidth (GB/sec) 35.2 35.2...

It also means that you probably have the 14 multi option ;) You will notice a huge performance boost just by running 14*243= 3.4Gig instead of the default 17*200=3.4Gig

What version do you have? Conversion works with REALPRODUCER 10 basic for me.

How about Abit AS8? LGA775 + 865PE http://www.hardforum.com/showt...BIT+AS8#post1027083132 http://www.vr-zone.com/?i=1335&s=1 looks like a killer mobo to me!!!! only minus, there is no Gigabit LAN chip onboard (P5P800 got it) BUT there is SATA RAID support ;)..anyway seems like...

Not sure what is holding your northy back but 3.6 is pretty good though! With vapo i've seen 3.0C@4.0...If its worth the upgrade is hard to say...I noticed major performance increase going from northwood to prescott mainly in heavy-duty multitasking sessions (increased multitasking abilities)...

lol yeah i agree...but i think that the lock free was implemented by intel and not by the mobo makers...they knew that it run hot and s478 was not really made for prescott..so all the mobo makers would have to redo the powerdesign specifikations but it would be to costly so instead they moved...

Yes lock free works with s478 also. Here is a breakdown of which ones work. 3.2 SL7B8 C0 stepping. works 3.2 D0 stepping does not work 3.2 E0 To few reports to draw any conclusion..most likely Dell got a bunch of s478 E0's as they are very had to find in a retailshop.... 3.4 D0 some...

your temps are fine. I bet it's your psu! could also be your ram settings ofcourse (divider, timings...)

water cooling will not help much if you are planning to max out the @presshot running the whole system with 18 on the 12v :D seriously, 18 on the 12v for a full @system rig with a 6600gt won't cut it for any higher stable oc.... Here is a better psu (Dual 12V total 30A) for your system that's...

Sure the idea is not new but have anyone actually done it before?? don't think so...lol yeah i remember there was one guy who placed the whole mobo inside the fridge but that didnt work due to condensation. Anyway nice to see that it can be done! I know some have placed the watertank inside the...

you'r talking about "Operations Per Clock" not "Instructions Per Cycle". northwood C /prescott E 6x2 HT enabled.