Recent content by matthewbolzicco

My mas o/c on the ram at 1:1 ratio is with 9x multiplier and 245 HTT ..so arround 2.2 ghz with DDR 490 with timings stretched out at 3-5-5-10 1T When i go higher than that i get windows crashes and the infamous blue screen of death on startup. I would actually like a higher cpu clock ...

I am running Everest / MBM5 to check all my temps, my mobo (asus a8n-sli deluxe) what USUALLY sat at 35º ... has spiked to 78º and thats at idle....i am freaking out b/c im worried im going to damage my system, but theres also the possibility its a sensor problem? The other day i was tinkering...

great replies boys

no the vcore is lower than the cpu voltage.

My bios has a cpu voltage and vcore voltage in two different screens all together... i should just raise the vcore then and leave the cpu voltage alone then.

Just wondering where i should draw the line on voltage before i get my Zalman 7700cu. Right now im just running the stock hsf until this guy on ebay picks up the pace and delivers! I dont really know where to stop with the voltages but i feel weary past 1.525v. Also thats my cpu voltage...

im runnin on 1GB OCZ EL Platnium Rev. 2

I pimped my 3200+ to 2.7ghz on stock HSF with a 270 fsb 10x... hope i'm not going to regret that :S

im running a 256mb MSI x800 Pro PCI-E 16X i started the test and went to shower, when i came back it was running 3 fps so it may have been testing the cpu.... maybe it was, i should run it again and just let it finish.. is 41º anything to worry about on stock air?

hey i just ran 3dmark05 with the ram @ PC3700 b/c it crashed when running at PC3800 and it was doing like 3fps and the graphics looked disgraceful .... i had a score of like 4800 before and when i stopped this test it said i was just short of 5000 but i dont understand how i beat my old...

thanks alot that link helped me alot ! my ram is actually PC3800 rite now i figure once i get my Zalman 7700cu in and eventually switch to a DFI Lanparty UT Nf4 i can get a little more out of it! but for now. i'll live with what i got! ...until i get on another o/c binge

Trying to push my ram as far as i can without vodiing the warranty of 2.9V on my asus a8n sli deluxe mobo. Currently im running at 240HTT with 10x mutliplier and my ram is set at 400mhz in bios which cpu-z reports under memory at 240.00mhz freq @ 2.5-3-3-7. Im fairly new to this overclockign...