Recent content by imported_PHarmer

Building a new projector computer with an ASUS P5K-E, E6850 chip, and 4 gig of ram. Will run two 17" monitors and 2 projectors off this computer. Need a video card that is stable and will not hang or crash. Also don't want anything loud, passive cooling would be nice. Will show mostly...

Bought an Ipaq H2215 off of ebay and on the label that has the serial numbers the top line is "IPAQ H2215, US-RET" Does the "RET" mean anything?

Thanks for the help guys. I got it working this morning. Found out that I din't know how to login to RDT when using two networks. Didn't know that I need to use the address of the router followed by the port that I was using. To login I had to enter 192.168.1.2:3389 thanks again

I have never set up a bridge between anything on these two networks. As I stated in my OP I really don't want the router thats a half mile away from my house controlling everything at my house. If that link should go down then my network at home would go down and I would like to stay away from...

Here's my setup. Wireless modem ==> wireless router(1) ==> access point ==> wireless router(2). Router #1 has two computers one wireless and another wired. The signal is then sent 2500 feet to an access point which is wired into router #2. Router #2 then feeds both wired and wireless...

Have a lot of programs loaded so I don't want to reload the computer. This is a projection pc that needs to be up 100% of the time when needed. Just wanting to help insure this by using raid 1. I don't want to repartition my original drive. I have the operating system on c with programs on...

Do I need to split the second drive into the same partions sizes before I let the controller build the raid? Or will the controller split the drive for me automatically.

Want to switch to Raid 1 on a sata controller on as Asus motherboard. Currentlly running off 1 hard drive on ide 1 which is split into C&D. Question is can the raid drives be partioned into C&D, so that I can copy all the info over and maintain the C&D partitions.

Sorry to see your web site is still down. We are in the process of buiding a computer for the exact same reason and also needed info as to which video card to use. Was think about using something in the ATI line since they used to be known for there better 2d images for text. Any help would...

SORRY wrong form

Found out how to hook up the router with dialup. The process should be as follow: First Step: Plug a computer to the Wireless Router, change the IP address of the wireless router so that it's in the same subnet as the main Router (the one that is connected to the Internet Modem); give it an...

How would you configure the routrer for this? I couldn't figure it out from the instructions.

I have been using that same modem for over a year. Mine is not marked. Works great in either jack. I don't think that this is your problem.

Me thinks that the BM6 don't support the faster flip chip celerons. The Bm6 tops out at 550 to 600. It is possible to get a 550 and set the bus to 100 and get it up to 850. Hope that I'm wrong, cause I got one sitting on the back shelf.

FCPGA CELERON 1000MHZ 128K CACHE .18 MICRON OEM VERSION SOCKET 370 1 (Purchase a fan to extend the warranty to 1 year) INCEL1000FC-OEM Ships 1-2 Days $41.00 Pc Progress Add $10 for shipping and a slocket. Not a bad upgrade if you need it.