Recent content by daudi811

I guess I didn't state this before. It doesn't matter what voltage I have ANYTHING at..cpu, ram, agp, etc...I still can't get past 144fsb...right now the cpu is at 1.65v ...but yes I've tried raising it but can't get past it....any other suggestions??

I doubt its my psu. It's an allied 450w and when I bought it was told it was a very very good one. I tried my friends Antec Tru 480w and it does the same thing. Multiplier is set to a maximum my board will allow with the mobile barton...at 12.5 currently.

Okay I just stuck my new cpu (mobile barton 2400+) in the other day thinking I would get quite the overclock but much to my surprise I can't even get it to run at stock speeds. Anything over 144fsb I can't boot into windows. What gives?? I have.. Mobile barton 2400+ 1.65v epox 8rda+ mobo 512mb...

There is a jumper setting for 133/166 and 100/133 so its just one setting and I have it on the 133/166 setting. I ram memtest for about an hour and it checked out okay. I still can't get above 145fsb....weird...

How are you guys running so high of fsb??? I can only get about 145fsb until it craps out on me. I've got: 8rda+ 512 samsung pc2700 allied 450w psu 2400+ m barton timings on ram set to optimal which is like 7 3 3 3 or something...

Okay I bumped the multi up to 13.5 but bios doesn't recognize it...it just shoots it back to a 600mhz k7....but the 12.5 multi will work...any suggestions as to why this is happening??

I thought nowadays it wasn't about mhz...I could be wrong though I don't really understand this stuff anyway.. for example a 1800mhz barton is faster than a 1800mhz tbred right???

Okay it wasn't at 2.63 and I raised it... so I was able to up it to about 144fsb but still, that seems insanely low compared to what people are getting (200fsb normally). And I dont' think 144 is still stock speeds yet?? I'm not sure the model of my heatsink since it doesn't have any writing on...

Okay I just got my new mobile barton 2400+ here are my system specs... Epox 8rda+ 512mb Samsung pc2700 Radeon AIW 9800pro Allied 450W PSU Heres my prob. I can't even get the 2400+ to run at stock speeds. It's stable only at 133x11 which I believe is below stock, heh. My first guess is my...

Okay I wasn't sure..that's what I just did. What are the stock settings and voltage on those 2400+ mobiles??

Just what the subject says. I boot it up and it's reading it as a 600mhz k7. What gives?? Bios is latest..

Just what the topic says. I slapped the new processor in and its reading it as a k7 600mhz?!?! What's going on? Any ideas?? Bios flashed to latest....