Zalman Resorator 1 Pump Replacement

[levatation0]

Hi guys,

I was wondering whether anyone was able to help me with replacing the pump on the zalman resorator, in the manual which can be downloaded here: (http://www.zalman.com/ENG/product/Product_Read.asp?idx=183) it clearly shows that there are screws on the back of the power switch to disconnect the pump wire, ala:

However on my switch there aren't any screws what so ever, here's a picture:

So the question is, how the heck do I take apart the power switch? I've tried pulling the back bit out but it doesn't seem to be coming off and I don't want to force it, anyone know what I should do?

Thanks in advance!

 

[aigomorla]

Clip.. and splice.

MAke sure u get + with + and - with -, or you will make your pump spin backwards.

 

[Schmide]

Actually it's an AC pump so if you switch the wires you'll either have (A) single pole switch bunch of juice in the wrong hole or (B) double pole switch it should be fine. Probably best to get it right as AC will make those dfib ants crawl up your arm.

- Integrated Water Pump : 5 W, Qmax 300L/h (A type: 230V-50Hz, B type: 120V-60Hz,
: C type: 220V-60Hz, D type: 110V-60Hz)

 

[aigomorla]

oh thats right its an ac pump..

lol...

+1 to schmide