• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

You Want Cold? Just Put Mobo In Frig

this doesn't work because I believe the compressor has to work really hard to keep the heat off.. where as cooling something that doesn't have heat requires just to cool it to a certain temp and maintain the temp with insulation.. or something.

not very effective.
 
It would be a difficult design and would look wierd, but why doesn't someone design a case where the cpu heatsink is on the outside of the case? Would make cooling a lot easier.
 


<< It would be a difficult design and would look wierd, but why doesn't someone design a case where the cpu heatsink is on the outside of the case? Would make cooling a lot easier. >>



That would also not be a very intelligent thing to do. It makes one of the most sensitive pieces of equipment on your computer more open for static charge or someone breaking it off. Aside from the dangers of damaging the equipment, you would also need to completely redesign motherboard and case, both of which usually come from two different companies that aren't likely to cooperate to produce it due to cost.
 


<<

<< It would be a difficult design and would look wierd, but why doesn't someone design a case where the cpu heatsink is on the outside of the case? Would make cooling a lot easier. >>



That would also not be a very intelligent thing to do. It makes one of the most sensitive pieces of equipment on your computer more open for static charge or someone breaking it off. Aside from the dangers of damaging the equipment, you would also need to completely redesign motherboard and case, both of which usually come from two different companies that aren't likely to cooperate to produce it due to cost. >>



He said HEATSINK.

You could use a heatpipe. Leave the CPU inside, but have the HSF outside 😉
 


<<

<<

<< It would be a difficult design and would look wierd, but why doesn't someone design a case where the cpu heatsink is on the outside of the case? Would make cooling a lot easier. >>



That would also not be a very intelligent thing to do. It makes one of the most sensitive pieces of equipment on your computer more open for static charge or someone breaking it off. Aside from the dangers of damaging the equipment, you would also need to completely redesign motherboard and case, both of which usually come from two different companies that aren't likely to cooperate to produce it due to cost. >>



He said HEATSINK.

You could use a heatpipe. Leave the CPU inside, but have the HSF outside 😉 >>



I figured someone would argue that point, so I already had counter-arguments planned out 🙂 I don't know about your computer, but on mine, I have the heatsink touching the processor through a conductive paste. My heat sink is metal, which conducts electricity, opening up for the static charge. Since the heat sink is attached to the motherboard, if it were broke off, it would take the socket that holds the chip away with it. Now, suppose we do use your heatpipe, it wouldn't be as effective. Solids conduct heat better than air, so less heat is absorbed, leaving your processor baking away. For the time, internal HSF are the most cost-effective solutions out there.
 
my cpu cooling fan is on the back of the case with a duct to the cpu , hot air right out the back not circulated inside the case . ( the fan is approx 4 inches across )
 
Actually, you can accomplish this if you seal your motherboard with epoxy resin. I think I first saw this on www.overclockers.com. You'll still have to watch for corrosion on the slot pins where the RAM/PCI cards make connection.

 
You must log in or register to reply here.

TRENDING THREADS

Back
Top