XP-M 2400+ and voltage

[Nucleus111]

I'm thinking of purchasing a mobile 2400+ and would like to get a 200FSB out of it. If I'm not mistaken, the multiplier is 13.5*133=1800mhz. I understand these processors can go high, but if I only wanted to do something like 10*200=2000mhz, what should I run the voltage at? Can these chips run safely at a normal Barton voltage of 1.65?

Are there any good sites that show the basics of overclocking these and not just "look what we got this sucker up to!"?

 

[Cashmoney995]

Should run fine at stock voltage. If you want to break 2200 then you start trying to up the voltage.

 

[myocardia]

Mine is actually Prime95 stable at 2.3ghz with 1.65v. It might go higher, but I haven't tried it. Of course, mine is a 2600, but still you shouldn't have any problems getting at least 2.0 or higher with 1.65v.

 

[Super56K]

I've got a 2400+ mobile I bought in March that is running at 2305mhz(11.5x200) at only 1.6vcore. It'll do 2400mhz at around 1.675-1.7vcore but I'm waiting on an airconditioner to help keep the temps down. I might not even run it at that anyways. I couldn't tell much of a difference while testing it between 2.3 and 2.4ghz in benchmarking and actual use.

 

[ColossusX]

Have a mobile 2500 Prime95 stable at 2.3ghz @ 1.625v.

 

[nemesismk2]

Originally posted by: Nucleus111
I'm thinking of purchasing a mobile 2400+ and would like to get a 200FSB out of it. If I'm not mistaken, the multiplier is 13.5*133=1800mhz. I understand these processors can go high, but if I only wanted to do something like 10*200=2000mhz, what should I run the voltage at? Can these chips run safely at a normal Barton voltage of 1.65?

Are there any good sites that show the basics of overclocking these and not just "look what we got this sucker up to!"?

I have my xp2500 running at 2.4ghz with only 1.7v and I used 1.6v for 2.2ghz!

 

[Falloutboy]

mine runs prime stable at 2.2ghz at 1.55 2.3ghz at 1.625 2.4ghz 1.75 2.5ghz 1.85 2.6ghz 1.95 (really really hot though)

 

[magratton]

Originally posted by: myocardia
Mine is actually Prime95 stable at 2.3ghz with 1.65v. It might go higher, but I haven't tried it. Of course, mine is a 2600, but still you shouldn't have any problems getting at least 2.0 or higher with 1.65v.

Yeah, with that 2600 (and a 2500 too btw) 1.675v in bios should yield prime stable 12x200. I have not noticed much in the way of difference between my ability to oc my 2500 and my 2600. The 2500 is 2 weeks younger so maybe that is the difference. 213x11.5 is the fasted I can go on my nf7-s. given all of this, 200x10 or 11 should run stable below (even well below) 1.65v.

 

[Nucleus111]

Thanks for the feedback everyone!

 

[NewBlackDak]

My 2600+ does 2200 at stock vcore. You can see(sig) where it is now. As soon as I get a good pump then Imma try some more vcore, and see how it fares.