WRT54G V2 Rebooting

[birdog]

I have a WRT54G V2 and it reboots probably every hour. I have the latest firmware on it now from linksys. I am going to try an alternate firmware. I have it in the open so I dont think it is a heat thing. Any suggestions?

 

[marulee]

Before the firmware upgrade, reset to default. Then try the connection using new CAT5. Good luck!

 

[InlineFive]

As marulee stated; try resetting the device to factory defaults and reflashing it. And in this case you don't need to worry about CAT5 as it's not a cabling issue.

 

[birdog]

Thanks for the reply - I did set to default before updating firmware. I think I may have the power supplies mixed up.

 

[birdog]

Anyone with a WRT54G tell me what thier power supply voltages say. On my WRT54G is says 12v 1000ma but on my power supply shows 12v 750ma so I dont think it is getting to correct power.

 

[birdog]

I tried the power supply for my RT31P2 which says 12v 1000ma and it comes up but when I look in the interface(192.168.1.1) it is all messed up. Can only see some of the info so I dont think that is the correct power needs.

 

[birdog]

anyone with WRT54G - can I get your psu info please. I also noticed that the RT31P2 has 23 Watts which is more than my WRT54G but I dont think it really matters. Anyone know?

 

[TC10284]

My WRT54G v2 router says 12v 1.0A (1000mA) and the power adapter says 12v 1.0A.