Writing 4 DVD's at a time fails, plz help

[kudilkrishna]

Hi Friends,

When i try to write 4 DVD at once using nero multiple recorder at 12x speed, two of them fails. can you plz tell why

I have a Quad Q6600
4Gb Ram
4 DVD drives from samsung ( same series and version and make)
Corsair tx850 smps
Seagate 1tb hard disk 7,200 rpm

writing two dvds simultaneously works, but does not work for 4 dvd's at once

thanks
krishna

 

[taltamir]

what kind of error do you get when they fail?

 

[soccerballtux]

are they sata or PATA burners? Shouldn't matter but...

 

[Pantlegz]

are they sata or PATA burners? Shouldn't matter but...

actually it would with IDE devices only one device per controller(channel) can read or write at once. And I'm pretty sure with sata multiple devices on the same controller are able to read/write at once. So if your program is trying to send data to all 4 DVD burners at the same time and only 2 of them are able to get the data, it will fail.

 

[VirtualLarry]

I don't think a magentic disc can provide four streams at a high enough speed to supply four 12X DVD burners. Perhaps an SSD would help. (Assuming everything is SATA here.)

 

[Starky]

I don't think a magentic disc can provide four streams at a high enough speed to supply four 12X DVD burners. Perhaps an SSD would help. (Assuming everything is SATA here.)

We have a "burn station" at the office which can do six CDs/DVDs at a time. Not sure what hardware it has but I know it has a single HD. The machine is probably three years old.

 

[spinejam]

Are you using decent quality dvd media like verbatim / sony? In the past, i could burn 3 at a time (16x) w/o an issue on a q6600 w/ 4gb of ram but since then i have dropped to two writers. i would think writing 4 simultaneously would significantly tax nero's buffer so monitor that too.

 

[PlasmaBomb]

Have you tried increasing the size of the buffer?

 

[aigomorla]

not to mention he is saturating his io bus.

OP, duplicators are based on SCSI normally.

They run on SCSI, not PATA or SATA.

Best person to talk to is Rubycon.
Shoot her a PM, she is probably what i consider the most knowledgeable in I/O

 

[taltamir]

I don't think a magentic disc can provide four streams at a high enough speed to supply four 12X DVD burners. Perhaps an SSD would help. (Assuming everything is SATA here.)

its not providing four streams, they are all burning the same data. it only reads the data off the HDD once, into ram... then it feeds it to the different drives from the ram

anyways... you can manually disable buffer underrun protection in your drives. This is the only possible way for a drive with buffer underrun protection to fail in such a manner (that or be so old that they were made before such technology became ubiquitous)... did you disable it? it is called "minimised data writing error" for samsung drives. (talk about terrible engrish...)
http://www.samsung.com/my/consumer/p...ype=prd_detail

I made a PATA machine with 4 DVD burners off the shelf years ago and had it read from one to a temp file and then burn back to all 4 using nero (I think it was v5 or 6) and had no problems that I recall...
only way I see you getting failed burns is if you turned off buffer underrun protection (or if your burners are utter and total crap not worthy of being sold on the market).
http://en.wikipedia.org/wiki/Optical_disc_recording_technologies#Buffer_underrun_protection

 

[BD231]

not to mention he is saturating his io bus.

OP, duplicators are based on SCSI normally.

They run on SCSI, not PATA or SATA.

Best person to talk to is Rubycon.
Shoot her a PM, she is probably what i consider the most knowledgeable in I/O

lol

 

[kudilkrishna]

all are sata writers ( all new one's)
all are quality dvds sony


Here is the error message that i am getting
Hare Ram
Ak
1C82-0000-19E5-MAAX-4003-0461-****

Windows XP 6.1
AMD64
Wow64Process
WinAspi: -

NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0

Recorder: <TSSTcorp CDDVDW SH-S223C (0/1)>Version: ID00 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
Recorder: <TSSTcorp CDDVDW SH-S223C (1/1)>Version: ID00 - HA 1 TA 1 - 7.10.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
Recorder: <TSSTcorp CDDVDW SH-S223C (2/1)>Version: ID00 - HA 1 TA 2 - 7.10.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
Recorder: <TSSTcorp CDDVDW SH-S223C (3/1)>Version: ID00 - HA 1 TA 3 - 7.10.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CDDVDW SH-S223C >Version: ID00 - HA 1 TA 1 - 7.10.1.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===

=== CDRom-Device-Map ===
TSSTcorp CDDVDW SH-S223C H: CdRom0
TSSTcorp CDDVDW SH-S223C I: CdRom1
TSSTcorp CDDVDW SH-S223C J: CdRom2
TSSTcorp CDDVDW SH-S223C K: CdRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 4060MB (4157752kB)
Free physical memory: 2916MB (2986900kB)
Memory in use : 28 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

29.3.2010
Burn DVD Image
6:07:19 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

6:07:19 PM #2 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

6:07:19 PM #3 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

6:07:19 PM #4 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

6:07:19 PM #5 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 3747250176
CUES:
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Users\Hare Ram\Desktop\Image.nrg>

6:07:19 PM #6 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media

6:07:19 PM #7 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media

6:07:19 PM #8 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media

6:07:19 PM #9 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media

6:07:20 PM #10 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1829711 (406:36.11, 3573MB)

6:07:20 PM #11 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

6:07:20 PM #12 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: TSSTcorp CDDVDW SH-S223C (0/1), Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193

6:07:20 PM #13 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

6:07:20 PM #14 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1829711 (406:36.11, 3573MB)

6:07:20 PM #15 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

6:07:20 PM #16 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: TSSTcorp CDDVDW SH-S223C (1/1), Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193

6:07:20 PM #17 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

6:07:20 PM #18 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1829711 (406:36.11, 3573MB)

6:07:20 PM #19 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

6:07:20 PM #20 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: TSSTcorp CDDVDW SH-S223C (2/1), Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193

6:07:20 PM #21 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

6:07:20 PM #22 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1829711 (406:36.11, 3573MB)

6:07:20 PM #23 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

6:07:20 PM #24 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: TSSTcorp CDDVDW SH-S223C (3/1), Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193

6:07:20 PM #25 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

6:07:20 PM #26 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 1829712 (1829712) = #1829712/406:36.12
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1829712 blocks [H: TSSTcorp CDDVDW SH-S223C]
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1829712 blocks [I: TSSTcorp CDDVDW SH-S223C]
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1829712 blocks [J: TSSTcorp CDDVDW SH-S223C]
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1829712 blocks [K: TSSTcorp CDDVDW SH-S223C]
--------------------------------------------------------------

6:07:20 PM #27 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [H: TSSTcorp CDDVDW SH-S223C] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3747250176, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1829712 | 0 | 0x00
1829712 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

6:07:20 PM #28 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [I: TSSTcorp CDDVDW SH-S223C] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3747250176, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1829712 | 0 | 0x00
1829712 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

6:07:20 PM #29 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [J: TSSTcorp CDDVDW SH-S223C] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3747250176, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1829712 | 0 | 0x00
1829712 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

6:07:20 PM #30 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [K: TSSTcorp CDDVDW SH-S223C] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3747250176, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1829712 | 0 | 0x00
1829712 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

6:07:20 PM #31 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

6:07:20 PM #32 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

6:07:20 PM #33 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

6:07:20 PM #34 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

6:07:20 PM #35 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

6:07:20 PM #36 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

6:07:20 PM #37 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.

6:07:20 PM #38 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

6:07:20 PM #39 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 12x (16,620 KB/s)

6:07:20 PM #40 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

6:07:20 PM #41 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode

6:07:21 PM #42 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 0
DVD high compatibility mode: Yes

6:07:21 PM #43 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

6:07:21 PM #44 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode

6:07:21 PM #45 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 0
DVD high compatibility mode: Yes

6:07:21 PM #46 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

6:07:21 PM #47 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode

6:07:21 PM #48 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 0
DVD high compatibility mode: Yes

6:07:21 PM #49 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

6:07:21 PM #50 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode

6:07:21 PM #51 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 0
DVD high compatibility mode: Yes

6:07:21 PM #52 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

6:07:21 PM #53 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 125820800

6:07:55 PM #54 Text 0 File Cdrdrv.cpp, Line 1352
18:07:55.730 - K: TSSTcorp CDDVDW SH-S223C : Queue again later

6:07:57 PM #55 Text 0 File Cdrdrv.cpp, Line 1352
18:07:57.010 - H: TSSTcorp CDDVDW SH-S223C : Queue again later

6:08:22 PM #56 Text 0 File Cdrdrv.cpp, Line 1352
18:08:22.859 - I: TSSTcorp CDDVDW SH-S223C : Queue again later

6:08:23 PM #57 Text 0 File Cdrdrv.cpp, Line 1352
18:08:23.857 - J: TSSTcorp CDDVDW SH-S223C : Queue again later

6:09:58 PM #58 Text 0 File Cdrdrv.cpp, Line 1352
18:09:58.081 - H: TSSTcorp CDDVDW SH-S223C : Queue again later

6:10:18 PM #59 Text 0 File Cdrdrv.cpp, Line 1352
18:10:18.127 - K: TSSTcorp CDDVDW SH-S223C : Queue again later

6:10:50 PM #60 Text 0 File Cdrdrv.cpp, Line 1352
18:10:50.435 - I: TSSTcorp CDDVDW SH-S223C : Queue again later

6:10:50 PM #61 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x82
CDB Data: 0x2A 00 00 08 3B 80 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C 82
Buffer x27f07b40: Len x10000
0x00 00 01 BA 44 4B 6C BB 7E 57 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 E9 DF 38 C7 3D 1B 01 EF D0
0xE2 8E 94 EC D2 EB 99 8F F0 08 C0 78 03 C2 32 84

6:10:50 PM #62 CDR -1135 File Writer.cpp, Line 303
Write error
I: TSSTcorp CDDVDW SH-S223C

6:10:52 PM #63 Text 0 File Cdrdrv.cpp, Line 1352
18:10:52.869 - J: TSSTcorp CDDVDW SH-S223C : Queue again later

6:10:53 PM #64 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x82
CDB Data: 0x2A 00 00 08 3D A0 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C 82
Buffer x28017f80: Len x10000
0x00 00 01 BA 44 4B 7E FB 25 57 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 5C 71 A9 5C FE 39 2E 20 C3
0x34 25 B3 67 13 F8 23 AF A8 B4 9C 49 CE DA EA E1

6:10:53 PM #65 CDR -1135 File Writer.cpp, Line 303
Write error
J: TSSTcorp CDDVDW SH-S223C

6:15:59 PM #66 Text 0 File WriterStatus.cpp, Line 113
<K: TSSTcorp CDDVDW SH-S223C> start writing Lead-Out at LBA 1829712 (1BEB50h), length 0 blocks

6:15:59 PM #67 Text 0 File WriterStatus.cpp, Line 113
<H: TSSTcorp CDDVDW SH-S223C> start writing Lead-Out at LBA 1829712 (1BEB50h), length 0 blocks

6:16:14 PM #68 Text 0 File DVDR.cpp, Line 3783
EndDAO: Last written address was 1829711 (1BEB4Fh)

6:16:14 PM #69 Text 0 File DVDR.cpp, Line 3783
EndDAO: Last written address was 539519 (83B7Fh)

6:16:14 PM #70 Text 0 File DVDR.cpp, Line 3783
EndDAO: Last written address was 540063 (83D9Fh)

6:16:14 PM #71 Text 0 File DVDR.cpp, Line 3783
EndDAO: Last written address was 1829711 (1BEB4Fh)

6:16:14 PM #72 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 12x (16,620 KB/s)

6:16:14 PM #73 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

6:16:17 PM #74 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed

6:16:17 PM #75 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

6:16:19 PM #76 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed

6:16:19 PM #77 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

6:16:21 PM #78 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed

6:16:21 PM #79 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

6:16:24 PM #80 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed

6:16:24 PM #81 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

6:16:24 PM #82 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

6:16:24 PM #83 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

6:16:24 PM #84 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon

 

[Mark R]

It looks like 2 of your recordings are failing due to 'KEY_MEDIUM_ERROR' which normally means that the recorder was unable to record the disc due to a disc problem.

You say that burning 2 simultaneously works, so it's unlikely to be a simple compatability issue. However, it is recognised that media burning may get less reliable at very high speeds.

It's unclear as to why things should work with 2 drives, and then not with 4 drives. Perhaps vibration has something to do with it - vibration from 4 drives may be enough to push a recorder off track, when it is only just operating at the limits of its capability.

Have you tried burning 4 discs at a lower speed (e.g. 8x)?

It may also be worth moving the burners around in the case, or testing with some of them outside the case, or installing some anti-vibration mounts.

Other options include trying some different discs from a different manufacturer (e.g. Verbatim) - it may be that your burners don't like your discs?

 

[Diogenes2]

Where does CPU and overclocking come into this ?

Just wondering..

 

[soccerballtux]

actually it would with IDE devices only one device per controller(channel) can read or write at once. And I'm pretty sure with sata multiple devices on the same controller are able to read/write at once. So if your program is trying to send data to all 4 DVD burners at the same time and only 2 of them are able to get the data, it will fail.

That's why drives have cache. 2MB ought to be fine, ATA runs at 133MB/s....

 

[Rubycon]

Make sure DMA is enabled on all drives (IDE devices).
Use good quality media.
Try a lower burning speed.
Make sure media is perfectly clean! One spec of dust can cause a coaster!
If possible try burning with all drives removed from the chassis.
Vibration can cause servo / focus issues and cause a bad burn. With several spindles you most likely will have an offbeat vibration. If this is excessive it can cause this logged error as Mark R suggested.
Make sure all drives are properly grounded. They should be through the power connector however if the chassis is floating there could be potential. This is unlikely but can still cause a problem if it indeed does exist.

 

[dbcooper1]

Is it always the same two that fail and do they fail at the same time? Have your tried rearranging them electrically/physically and does that change the symptom in any way?