• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

wow tbred b rocks... but i have safety questions

hans007

Lifer
i just got one from the fs/ft board, and wow. $70 and i got a auihb tbred b 2100+ week 01 2003. with 1.55 v default voltage.


at just 1.7 volts. wow. i'm at 2700+ speeds .... i set to 1.7 volts and it reads 1.73 to 1.75 in motherboard monitor.



i've got a dynatron retail heatsink, but the copper base version.


is 1.74 volts too much? will this heatsink work well? i have no case cooling, and an antec sl300, and msi k7n2g


UPDATE: crashed at 1.7 volts setting after a little over an hour so upped it to the 1.75 volt setting yielding an actual 1.79 volts
 
I have the same stepping, same week chip running @ 2.17GHz @ 1.65V and idling @ 41C loaded @ 49C. I'll be installing an Alpha PAL 8045 on Friday, temps. should drop like a rock then.

Edit: 1.74V isn't too high, but I don't think you need that much voltage for that o/c. You could try to back it down a step or two. I would.
 
well it'll only run at the 1.7 setting. prime crashes out at 1.675. figure i might even have to move it up one more notch to be safe since prime hasnt really run that long. the diode temp seems to be 50C ,on full load so not bad.
 
How are you guys altering the voltages? And are you changing the multipliers and FSB speed through BIOS?
 
Originally posted by: Malladine
How are you guys altering the voltages? And are you changing the multipliers and FSB speed through BIOS?

i changed my voltage in the mobo. my chip is locked, so i dont know if i can change though i heard some nforce2's could change multiplier on unlocked chips.

either way i dont think i can run much higher fsb, so i just left it at 166bus with matching ram.
 
My results from newegg.com

AXDA1700DLT3C
9391067271066
JIUHB 0310XPMW
AMD Athlon XP 1700+ Retail CPU

All votages default except CPU votage at 1.6v

Sandra2003
CPU: 8289 MIPS (beats P4-B 3.06 and XP3000+)
MEM: 2681/2553 (beats 850E chipset w/ Rambus PC800cl2)

PCMARK2002
CPU: 6737
MEM: 4703
HDD: 1119
 
Back
Top