• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Won't Boot, won't post.

Synderon

Junior Member
ASUS EN7600GS GeForce 7600GS 256MB 128-bit GDDR2 PCI Express x16
Patriot Signature 1GB (2 x 512MB) 240-Pin DDR2 SDRAM DDR2 667 (PC2 5300)
ECS NFORCE4M-A (V3.0) Socket AM2 NVIDIA nForce4 4X ATX AMD Motherboard
AMD Athlon 64 X2 3800+
400 watt power supply. 18amps on the 12volt rail.


I don't know if this is a processor issue but this is where I am starting. My computer was working fine until I opened it up to unhook my DVD writer. After that, whenever I turn it on.... the fans turn on and I hear the hard drive spinning but doesn't seem to be doing any activity. No beeps or anything. Nothing on the screen either. I've determined that it isn't the hard drive or video card. I've already tried clearing the CMOS. Is it the motherboard or processor? Did I just short something out or what?
 
Synderon,

It would appear that u unloaded some static electricity to some component on your MB.

Did u "unhook" (remove IDE/SATA cable) while pc was on?

if it was OFF at the time, chalk this up as a lesson learned on making sure to wear a ESD strap. (Fry's $5-12 part)

At this point, barrow or purchase a PSU and swap it out. (as a test)

If pc doesn't POST then it's a good chance u shorted MB and may have also fry'ed your CPU.

good luck

al
 
Back
Top