• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Wiring Help Needed

S

SpedeRacer

Member
Ok, the 1394 one is straightforward enough, just a bit annoying. Vp goes to the 12V labeled pins, VG goes to any ground pin, as does the GROUND pin. TPA* and TPB* ought to be the same as TPA+ and TPB+ so try that. You won't hurt a firewire device plugging in the signal wires backwards so don't worry about it (I know, I've done it because the original Antec Sonata case had mislabeled wires). If the device doesn't work just switch the TPA and TPB plus and minus and see if it works. If that doesn't do it, then you're on your own with it.

For USB compare the color of the wires on the case's USB cable to the color of the wires in the USB connectors that came with your mobo. If they are organized the same way just plug and go because these colors are standardized. If they aren't call up your case manufacturer and ask them what each wire is or go on their forums or tech support webpages and look around.

For the audio call up Asus tech support and get them to talk you through it.

It is also possible that if you read the manual for the case and mobo you will find things explained so that you can figure this out.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top