Window kits for Antec SX10xx cases?

[sep]

Someone posted here before where to get special windows kits for Antec SX10xx case (due to the lock on the side). Anyone remember where this was?

 

[amdskip]

here ya go🙂

 

[talonts]

Or see this thread for info on using 2 latches and creating your own window.

 

[cmdrdredd]

why wouldn't a regular window kit work? Why would it have to look curvy?

 

[Jeniva]

Do it your self!!..its more fun that way!! here are some pics.

 

[cmdrdredd]

Well, I was gonna put a window on my case but I can't get the wires cleaned up. I try to move them out of the way but they don't stay. Sure you can say get some of this material and move the wire away, but my PSu has ALOT of wires hanging around...a little bit or a sleeve on the wire won't keep it clean inside.

 

[MiklosMillora]

Where did you get the extra handles?

 

[talonts]

<< Where did you get the extra handles? >>



I'm going to assume you were talking to me about http://www.vfaq.com/Case/ and the door latches, since noone else has mentioned latches/handles.

That page states pretty clearly where I got the parts. I don't know how much clearer I can make it.

 

[Jeniva]

<< Well, I was gonna put a window on my case but I can't get the wires cleaned up. I try to move them out of the way but they don't stay. Sure you can say get some of this material and move the wire away, but my PSu has ALOT of wires hanging around...a little bit or a sleeve on the wire won't keep it clean inside. >>



Well...lol...Mine had quite a few wires to take care of as well...it takes some time to do..but its definatly worth it...its a feeling of accomplishment when you finish...


Can never MOD enough...

 

[cmdrdredd]

heh I'm gonna give it a go later tonight. Got some wire loom from Home Depot and will hopefully have it done tonight...cuse my window is comming in from UPS on tuesday

 

[cmaMath13]

Hey guys, THANKS for the information. I have a SX1030b and have been wondering if there was a good window kit for it. Now I know!

Thanks!

 

[nnnyyy]

Thanks for the links guys. I have been meaning to do this for a while but I wanted to see what the results were first.

 

[DongTran]

or you could just send it to me and have it precision waterjet cut @ 44,000 PSI with almost any design you want with a matching acrylic piece......