Wierdest Network Problem ever

GoingUp

Lifer
Jul 31, 2002
16,720
1
71
:confused: So I just reformatted my laptop and installed Win2k. I install the network drivers for my laptop. When there is no cable connected to the laptop, the laptop shows that there is a network connection. Once I connect the ethernet cable to my nic card, my laptop tells me that there is no connection. The 10/100 light comes on, and the activity light blinks like crazy on the dongle. I can't do anything or even try to reset the IP address.... A big WTF is in order :|

Edited for more info
 

Evadman

Administrator Emeritus<br>Elite Member
Feb 18, 2001
30,990
5
81
have you tried a different cable? perhaps it is internaly shorted.
 

GoingUp

Lifer
Jul 31, 2002
16,720
1
71
Originally posted by: Evadman
have you tried a different cable? perhaps it is internaly shorted.

I replugged the same cable back into my desktop that I am using to post on AT right now
 

Evadman

Administrator Emeritus<br>Elite Member
Feb 18, 2001
30,990
5
81
ok, so the problem is with the laptop. is the laptop new? (aka: have you used this network port before?)

If it is, have you tried other drivers? such as MS's version or ones made for a "similar" nic?
 

GoingUp

Lifer
Jul 31, 2002
16,720
1
71
Originally posted by: Evadman
ok, so the problem is with the laptop. is the laptop new? (aka: have you used this network port before?)

If it is, have you tried other drivers? such as MS's version or ones made for a "similar" nic?

The nic and the same version of the driver were working before just fine before I reformatted. I dont understand :| I havent even put on any service packs yet. Just Win2k and the Nic drivers.....

***stumped***
 

Chadder007

Diamond Member
Oct 10, 1999
7,560
0
0
The NIC probably went bad on you. I had one do this yesterday, but on a desktop PC. Also, the NIC wouldn't show up under Hardware. But the lights would blink a bit when I plugged in the cable and it would say the network was unplugged when I plugged it in.

Edit: I switched it out with a different card, put it in the same slot and off it went. Worked fine after that of course.
 

GoingUp

Lifer
Jul 31, 2002
16,720
1
71
it showed up under the hardware though, the computer recognized it after I installed the drivers.....
 

FoBoT

No Lifer
Apr 30, 2001
63,084
15
81
fobot.com
Originally posted by: Chadder007
The NIC probably went bad on you.

you said "the activity light blinks like crazy on the dongle" this is often indicative of a bad nic

try another one