Why do I keep getting Blue Screen just by install Win2k

[dvdman3]

I am not sure why I keep getting blue screen with IRQ_Less_Than_Equal to ? I know that there are 100s of possibilities.. any ideas ?

 

[aircooled]

What are the system specs?

It could be so many things, but I'd start by removing all hardware except whats needed for the install.

Could also be bad memory or too aggressive memory settings in the BIOS.

 

[waylman]

update your bios

 

[t0mmyb0y]

I saw another post about this with a link to a MS support page. The problem is your memory. Either don't overclock it or replace it if its bad. I would recommend running memtest86 first.

 

[foofoo]

I saw another post about this with a link to a MS support page. The problem is your memory. Either don't overclock it or replace it if its bad. I would recommend running memtest86 first.

it is most likely the ram.
http://www.memtest86.com
good luck