• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

why can't I get 133?

L

Lance95113

Junior Member
I got my Epox 8kta3 and t-bird 900 going fine. With the fsb at 100 I've taken it to 1.0 no problem. When I switch the jumper on the board to 133fsb it won't boot. I get a post code that says" auto detection of on board dram and cache". The bios is set to auto detect the memory at the same speed as the fsb. Help!
 
I've read of several people having this problem. I suggest you check out AmdZone.Com/forums/ Think it been discussed there quite a bit. I hope the link is right.
 
So you've modded the cpu for a 10x multiplier? The board is going to try and boot at 10x133MHz. I don't think so.😉
You need to set your cpu up for a lower multiplier (Pencil trick, ect.) which then you can adjust thru bios for a higher one if you desire to try, in combo with 133MHz bus or higher.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top