Whats eSATA II?

ixelion

Senior member
Feb 5, 2005
984
1
0
Recent Asrock mobos have this "eSATA II" how is this diffrent from regulare SATA II? Is usefull at all?
 

bob4432

Lifer
Sep 6, 2003
11,726
45
91
my cable company issued dvr has a esata port on the back, so it seems like they are popping up more often.
 

ixelion

Senior member
Feb 5, 2005
984
1
0
Err.. excuse my nooberosity but why would you need an external sata port?
 

Googer

Lifer
Nov 11, 2004
12,576
7
81
Originally posted by: ixelion
Err.. excuse my nooberosity but why would you need an external sata port?


From BUSlink.com
Max Sustained Transfer Rate

SATA: up to 59MB/S
FireWire: up to 35MB/s
USB 2.0: up to 34MB/s**

**Disclaimer - Actual storage space that you will enjoy may differ as indicated. Digital storage industry measure on base 10, while computer software measure on base 2. (for more detail, please see NIST definition) When you buy an 80GB hard drive, it may only show 74GB available space on your Windows.
It's a higher performance substutute for USB and firewire for external HDD duities.
BUSlink has had an external SATA Drive SATA Drive avalable on the market for 3 years or so. BUSlink was first and the only on avalable but one or two more have arrived on the market since then.




You do not need a special motherboard. You can get external sata by purchasing a
controller card that has sata ports on the back plate. Or if your motherboard has a free sata port then a simple PCI back plate will work


 

Looney

Lifer
Jun 13, 2000
21,938
5
0
Originally posted by: ixelion
Err.. excuse my nooberosity but why would you need an external sata port?

Mostly external HDDs and DVDRs (and probably eventually blu-ray/HDDVD).
 

LED

Diamond Member
Oct 12, 1999
6,127
0
0
On the AMD side eSATA/SATA was not hot swapable unil the creation of the NVidia NForce4 Ultra chipset and the ULi was not hot swappable until the latest released chipset {ULi M1697} which also brought along other features such as Firewire {1394a} and High Definition (HD Azalia) audio...
 

Googer

Lifer
Nov 11, 2004
12,576
7
81
Originally posted by: Baked
Originally posted by: MDE
Originally posted by: Hanpan
easier to hot swap. Think high speed usb.
Now we need external power connectors.

Eventually, we'll see external HDs and DVDs using SATA port.

Current External HDD's use a power brick or AC/DC Adapter. External SATA drives will use the same.
 

TanisHalfElven

Diamond Member
Jun 29, 2001
3,512
0
76
man i can't belive my DFI nf4 boards is bieng outclassed/out featured by an ASrock board. anyway this tech seems like it could potentially be used for more bandwidth intensive task like digital video and external tv tuners.
 

Googer

Lifer
Nov 11, 2004
12,576
7
81
Originally posted by: tanishalfelven
i have a question. i have dfi infinity nf4 sli motherboard.
does it support esata.

eSATA is 100% identical to regular sata. The only differance is the port location. Any motherboard with a spare SATA port can get the esata job done with the use of a Bracket. If your motherboard is older than a $30 SATA card in conjuntion with a esata bracket will work just the same.

http://granitedigital.com/catalog/pg50_cables&brackets.htm
 

Googer

Lifer
Nov 11, 2004
12,576
7
81
Originally posted by: Googer
Originally posted by: Baked
Originally posted by: MDE
Originally posted by: Hanpan
easier to hot swap. Think high speed usb.
Now we need external power connectors.

Eventually, we'll see external HDs and DVDs using SATA port.

Current External HDD's use a power brick or AC/DC Adapter. External SATA drives will use the same.

There are some exceptions here. Some small 2.5 inch and microdrives do not need a power adapter.
 

Googer

Lifer
Nov 11, 2004
12,576
7
81
Originally posted by: Inspector Jihad
anyone have any experiences with esata? how is it compared to external usb?

eSATA is 100% identical to regular SATA. The only minor differance is the location of the jack you plug your cable in to. In terms of speed eSATA is the same as regular sata and is much much faster than USB or 1394/Firewire.
 

smorzando

Junior Member
Jun 19, 2006
4
0
0
I've been looking to buy an eSata II PCI Express card, but I noticed the comment below, as well as from another buyer that said they were unable to use an internal SATa cable. I understand the speeds are the same and what not, but if this is accurate, why would they change the shape of the connector?

"Be aware the external ports on this are an I-shaped eSATA connector, not the L-shaped internal connector. "

http://www.newegg.com/Product/Product.asp?Item=N82E16813997002
 

Googer

Lifer
Nov 11, 2004
12,576
7
81
Originally posted by: smorzando
I've been looking to buy an eSata II PCI Express card, but I noticed the comment below, as well as from another buyer that said they were unable to use an internal SATa cable. I understand the speeds are the same and what not, but if this is accurate, why would they change the shape of the connector?

"Be aware the external ports on this are an I-shaped eSATA connector, not the L-shaped internal connector. "

http://www.newegg.com/Product/Product.asp?Item=N82E16813997002


Granite Digital has a combination card with both external and internal all in one.

http://granitedigital.com/catalog/pg49_fasthostadapters.htm
 

Googer

Lifer
Nov 11, 2004
12,576
7
81
Originally posted by: smorzando
I've been looking to buy an eSata II PCI Express card, but I noticed the comment below, as well as from another buyer that said they were unable to use an internal SATa cable. I understand the speeds are the same and what not, but if this is accurate, why would they change the shape of the connector?

"Be aware the external ports on this are an I-shaped eSATA connector, not the L-shaped internal connector. "

http://www.newegg.com/Product/Product.asp?Item=N82E16813997002

Huh?