Whats a good store that sells LED's and cold cathodes?

[necro007]

I want to use them in my Xbox, also it would be good if it will not be like $1 for one LED.

 

[NicePants42]

I always get mine off Ebay.

 

[SparkyJJO]

SVC.com has cold cathodes. LEDs you can get at radioshack or ledshoppe dot com (EDIT why did it turn it into stars when I had the .com ending on it? ) but they sell them in bulk. Ebay of course is a great place to find stuff.

 

[RallyMaster]

http://www.besthongkong.com/?ref=4

 

[DerwenArtos12]

FrozenCPU is about the best compendium for all things case. It doesn't have everything but they're getting close.

 

[necro007]

Also i should have said that I'm from Canada so if you guys do give me links could you tell me if it ships to Canada.

Thanks.

 

[necro007]

Hey guys how is this one?

Do any of you guys know how bright it is and what resistor i should get with it?

 

[SparkyJJO]

Originally posted by: necro007
Hey guys how is this one?

Do any of you guys know how bright it is and what resistor i should get with it?

linky doesn't work because for some reason AT doesn't like ledshoppe with the .com attached to the end you do realize that is a pack of 500 right? I'll bet being a blue LED it'll be pretty bright, I haven't found a dim one yet.

In order to figure out what resistor you need, what voltage you gonna run off of? 5V, 12V?

 

[Zap]

I've gotten some LEDs from All Electronics. Pricing is reasonable and they will sell small quantities, plus flat rate shipping.

 

[necro007]

Originally posted by: SparkyJJO

Originally posted by: necro007
Hey guys how is this one?

Do any of you guys know how bright it is and what resistor i should get with it?

linky doesn't work because for some reason AT doesn't like ledshoppe with the .com attached to the end you do realize that is a pack of 500 right? I'll bet being a blue LED it'll be pretty bright, I haven't found a dim one yet.

In order to figure out what resistor you need, what voltage you gonna run off of? 5V, 12V?

Oooo sorry about the link.

Any way yes i checked it is a pack of 500:Q.

Any way i hope it is bright.

So if i buy from thouse guys at "LED Shop.com" it will be $23.34 + free shiping.

Also ... i think its a good price.

Anyway as for the power...you see i am trying to follow this guide here!

So for the power i don't want to blow the LED so...well i don't know what do you recomend?

I was thinking about 5v-7v(that would be enough with out using too much power.

 

[SparkyJJO]

OK so 5V. Use This resistor calculator referenced on the site - make sure you use the one for LEDs in parallel. For those LEDs from ledshoppe .com you would put in 3.5 volts for the drop across each LED, 25 milliamps for the desired LED current, and then how many LEDs you will have connected. So if you had 8 LEDs you would need a 10 ohm resistor with a power rating of 0.4 watts.

I got those numbers from the ledshoppe .com website, under forward voltage and max continuous forward current - I took a middle of the road voltage between the two values given and 5mA less than the max continuous current.

This is great for me because I've been looking for an easy way to calculate what resistors I need for some LED mods, thank you

 

[necro007]

Originally posted by: SparkyJJO
OK so 5V. Use This resistor calculator referenced on the site - make sure you use the one for LEDs in parallel. For those LEDs from ledshoppe .com you would put in 3.5 volts for the drop across each LED, 25 milliamps for the desired LED current, and then how many LEDs you will have connected. So if you had 8 LEDs you would need a 10 ohm resistor with a power rating of 0.4 watts.

I got those numbers from the ledshoppe .com website, under forward voltage and max continuous forward current - I took a middle of the road voltage between the two values given and 5mA less than the max continuous current.

This is great for me because I've been looking for an easy way to calculate what resistors I need for some LED mods, thank you

You are thanking me:Q dude Thankyou for your help, have you bought any things from thouse guys before?

Also so all i would need to do is :

1. connect all 8 leds in parallel
2. find 1(one) 10 Ohm resister with a power rating of 0.4 watts.

Also when looking for a resister i know how to read it (look at the color'd bands arround it) so the 10 Ohm part is okay but how will i know if it is a 0.4 watts?

 

[SparkyJJO]

I'm thanking you because I never found an easy way to calculate the resistors needed. Your link to that guide gave me what I needed

I never ordered from ledshoppe .com but others here have and my friend got an LED flashlight from them. It was hassle-free

When buying a resistor they should tell you what power rating it is. 0.4 is slightly strange, 1/2 watt is a standard value. It'll be a relatively fat resistor, not those tiny little things. should be about 1/8" diameter I think, maybe 1/4" - when in doubt, use the larger one

 

[necro007]

Also one more thing,all i do is use thouse 8 LEDs and connect it up to 1(one) 10 Ohm resister, is this correct?

 

[SparkyJJO]

Originally posted by: necro007
Also one more thing,all i do is use thouse 8 LEDs and connect it up to 1(one) 10 Ohm resister, is this correct?

Yes. If you hook up a resistor to every single LED they would have to be 68 ohm resistors.

 

[necro007]

Originally posted by: SparkyJJO

Originally posted by: necro007
Also one more thing,all i do is use thouse 8 LEDs and connect it up to 1(one) 10 Ohm resister, is this correct?

Yes. If you hook up a resistor to every single LED they would have to be 68 ohm resistors.

No no no, i don't think you understand me.....I am asking you if i should just hook up thouse "8" LED's to "1" 10 Ohm resistor

OR

use 8 LED's and hook them each to "8" 10 Ohm resisters.

So basiclly do i use "1" resister with thouse "8" LED's or do i use "8" 10 Ohm resisters with thouse "8" LED's.

 

[SparkyJJO]

sorry I didn't mean to confuse you. All 8 LEDs in parallel to the single 10 ohm resistor.

 

[necro007]

Originally posted by: SparkyJJO
sorry I didn't mean to confuse you. All 8 LEDs in parallel to the single 10 ohm resistor.

OOoooooo thanks, looks like after i mod thouse LEDs in my Xbox I'l post some Pic's here.

And i will have 492 Leds left over:Q for how know what?

 

[SparkyJJO]

Originally posted by: necro007

Originally posted by: SparkyJJO
sorry I didn't mean to confuse you. All 8 LEDs in parallel to the single 10 ohm resistor.

OOoooooo thanks, looks like after i mod thouse LEDs in my Xbox I'l post some Pic's here.

And i will have 492 Leds left over:Q for how know what?

Hmm... if you were in the US I'd be interested in some Well find out how much it would cost to ship a dozen or two of those to Ohio, ZIP 44813. You might want to check to be sure that ledshoppe .com ships to canada or what the price difference may be

 

[necro007]

Originally posted by: SparkyJJO

Originally posted by: necro007

Originally posted by: SparkyJJO
sorry I didn't mean to confuse you. All 8 LEDs in parallel to the single 10 ohm resistor.

OOoooooo thanks, looks like after i mod thouse LEDs in my Xbox I'l post some Pic's here.

And i will have 492 Leds left over:Q for how know what?

Hmm... if you were in the US I'd be interested in some Well find out how much it would cost to ship a dozen or two of those to Ohio, ZIP 44813. You might want to check to be sure that ledshoppe .com ships to canada or what the price difference may be

Belive it or not they don't charge for shiping at all.:Q:Q:Q:Q:Q:Q

They say USA: Free shiping, Canada: Free shiping,All other countries: Free Shiping.

So i guess if you are in the states all you pay is $20.00 for 500 LED's.

Not bad if you ask me.:thumbsup:

 

[GalvanizedYankee]

Your title stated Canada when first posted yesterday. Then you edit it out, then several
posts down this thread, you state, golly jee! I'm in Canada. What's that about??

Look under Eye Candy as some info my be helpful http://www.cpemma.co.uk/index.html
Search our General Hardware Forum for Canadian, there is a long list of vendors.
PCAbusers and SPCR have Canadian vendors listed in thier forums as a dedicated thread.


...Galvanized

 

[Mark R]

OK, they're not cheap and they don't have free shipping.

But when I LEDed my Xbox I got my LEDs from luxeonstar.com.

Pic

I think I used 3 LEDs (royal blue side-shooting star) in series with a 2W 6-and-a-bit Ohm resistor (actually I think I used 2 1W 3.3 Ohm ones to spread the heat) spliced into the 12 V line. The LEDs were then thermal epoxyed onto the metal shielding of the Xbox which acts as both support and heatsink.

 

[Luckyboy1]

[DD - Donald Duck voice]
[BS - background singers]
[EP - Elvis voice]

Went to a party the other night
All the ladies were treating me right
Moving my feet to the disco beat
How in the world could I keep my seat

All of a sudden I began to change
I was on the dance floor acting strange
Flapping my arms I began to cluck
Look at me..
I'm the disco duck

[DD:] Ah, get down, mama
I've got to have me a woman, ha, ha, ha, ha, ha
[BS:] Disco, disco duck
[DD:] Got to have me a woman
[BS:] Disco, disco duck
[DD:] Oh, get down, mama
[BS:] Try your luck, don't be a cluck, disco
[DD:] Disco
[BS:] Disco
[DD:] Disco
[BS:] Disco
[DD+BS] Disco
[BS:] Disco, disco duck
[DD:] All right
[BS:] Disco, disco duck
[DD:] Ah, get down mama,
Oh mama, shake your tail feather, ha, ha, ha, ha, ha

When the music stopped I returned to my seat
But there's no stoppin' a duck and his beat
So I got back up to try my luck
Why look

[DD:] Everybody's doin' the
[DD+BS] Disco, disco duck
[DD+BS] Disco, disco duck
[BS:] Try your luck
[DD:] Wave to me
[BS:] Don't be a cluck
[DD:] Disco
[BS:] Disco
[DD:] Disco
[BS:] Disco
[DD+BS] Disco
[BS:] Disco, disco duck
[DD:] My, oh my
[BS:] Disco, disco duck
[DD:] Ah, get down mama, ha, ha, ha, ha
[BS:] Try your luck, don't be a cluck
[DD:] Disco
[BS:] Disco
[DD:] Disco
[BS:] Disco
[DD+BS] Disco
[BS:] Disco, disco duck
[BS:] Disco
[BS:] Disco, disco duck
[BS:] Try your luck, don't be a cluck
[EP:] Thank you duck
[BS:] Disco
[EP:] For gettin' down
[BS:] Disco disco disco
[EP:] Thank you so very much
[BS:] Disco duck
[DD:] You're welcome
[BS:] Disco Disco Duck
[BS:] Try your luck, don't be a cluck
Disco, disco, disco

 

[Luckyboy1]

I'm sorry! I know this is a bit childish and I promise this will be the last one!

Body...wanna feel my body?
Body...such a thrill my body
Body...wanna touch my body?
Body...it's too much my body
Check it out my body, body.
Don't you doubt my body, body.
talkin' bout my body, body,
check it out my body

Every man wants to be a macho macho man
to have the kind of body, always in demand
Jogging in the mornings, go man go
works out in the health spa, muscles glow
You can best believe that, he's a macho man
ready to get down with, anyone he can

Hey! Hey! Hey, hey, hey!
Macho, macho man (macho man)
I've got to be, a macho man
Macho, macho man
I've got to be a macho! Ow....

Macho, macho man
I've got to be, a macho man
Macho, macho man (yeah, yeah)
I've got to be a macho!

Body, its so hot, my body,
Body, love to pop my body,
Body, love to please my body,
Body, don't you tease my body,
Body, you'll adore my body,
Body, come explore my body,
Body, made by God, my body,
Body, it's so good, my body

You can tell a macho, he has a funky walk
his western shirts and leather, always look so boss
Funky with his body, he's a king
call him Mister Eagle, dig his chains
You can best believe that, he's a macho man
likes to be the leader, he never dresses grand

Hey! Hey! Hey, hey, hey!
Macho, macho man
I've got to be, a macho man
Macho, macho man
I've got to be a macho! (all right)

Macho, macho man (yeah, yeah)
I've got to be, a macho man
Macho, macho man
I've got to be a macho! All Right!

Ugh! Macho..baby!
Body, body, body wanna feel my body,
Body, body, body gonna thrill my body,
Body, body, body don'tcha stop my body,
Body, body, body it's so hot my body,

Every man ought to be a macho macho man,
To live a life of freedom, machos make a stand,
Have their own life style and ideals,
Possess the strength and confidence, life's a steal,
You can best believe that he's a macho man
He's a special person in anybody's land.

Hey! Hey! Hey, hey, hey!
Macho, macho man (macho man)
I've got to be, a macho man
Macho, macho man
I've got to be a macho! (dig the hair on my chest)

Macho, macho man (see my big thick mustache)
I've got to be, a macho man
Macho, macho man
I've got to be a macho! (Dig broad shoulders)

Macho, macho man (dig my muscles!)
I've got to be, a macho man
Macho, macho man
I've got to be a macho!

Macho, macho man
I've got to be, a macho man
Macho, macho man
I've got to be a macho! HEY!

 

[potato28]

The Source by CC. Very cheap, and available!