• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

What thermal paste do you use, and how do you spread it?

C

cheesehead

Lifer
I've been wondering what thermal paste people use. Due to extreme incompetence, I've never seemed to have much luck applying thermal paste (the "apply grain of rice and spread with credit card" method always seems to need repeated touch-ups for an even distribution) and, because I regularly swap CPUs on old PCs, seem to go through quite a bit of it. I'd also like to try my hand at overclocking, and rumor has it that some newer thermal pastes will give a small drop in temperature over their predecessors.


There are also some "brush-on" thermal pastes on the market. Has anyone had any experience with these?
 
I've used both Arctic Silver 5 and zalman thermal grease ZM-STG1, but haven't tested them head to head with same the HS and CPU.

With AS5 I tried the credit card trick but it wouldn't spread properly so I got some clear plastic wrap, wrapped my finger in it and spread it around until it was a even coat and switched to a clean spot on the plastic when spreading it to remove any excess. Seems to work good with a max of 39c (without over clocking).

The zalman thermal grease spreads like grease. ZM-STG1 also comes with a brush applicator so there is nothing overly complicated about it, just make sure you don't put too much on. Where it is more liquid then the AS5 it doesn't have the one month break in period to see a extra drop in temp up to 5c.

From what I've read, ZM-STG1 is pretty damn near to AS5 (after 1 month break in) with a difference of 1 to 3 degrees C. As long as you are only doing mild OCing, ZM-SGT1 might be the best solution if you have problems with applying thermal paste but still want quality. Also one good way to see just how much you need, spread the bare minimum of thermal grease/paste on the CPU (even if you think it's not enough), place the HS on and screw down. Then remove and examine the HS base to see if there is any area's that are still clean, apply extra to those areas (only).
 
Originally posted by: mpilchfamily
Bottom line use what you like and follow the manufactures instructions.
Click to expand...

Exactly@!!!! The differences between the top brands are not worth arguing over!!

Peace and Merry Christmas!!
 
I use some Shin-Etsu that I have a bunch of. it works great, I spread it using the Arctic Silver method for Dual Core CPU's. I put the line down the middle and let the HS do the work 🙂
 
I still use AS5 exactly because of the OP title, I find it much easier to apply. I've tried a few of the others but find them either too viscuous/liquidy or too dry. Every review I've seen shows AS5 within 1-2C of the competition as I believe MadScientist's links also show, and that's usually with no cure time.

 
I've had a 12g tube of Arctic Ceramique that I've used forever. It's probably gone beyond its shelf life by now, but I'm still using it. I just put a rice grain sized blob on the CPU and let the heatsink flatten it out, then the heat from the CPU does the rest.
 
Originally posted by: I4AT
I've had a 12g tube of Arctic Ceramique that I've used forever. It's probably gone beyond it's shelf life by now, but I'm still using it. I just put a rice grain sized blob on the CPU and let the heatsink flatten it out, then the heat from the CPU does the rest.
Click to expand...

ditto here still use the Ceramique as I have a giant tube I got from SVC a long time ago.
 
I tried that diamond stuff....one time.

When they talk about diamonds being one of the hardest substances ever known, that applies to this stuff too.

Talk about some resistance to being spread...kinda like cruncy peanut butter that's been sitting in the cold.

I gave the rest away.
 
Still Arctic Silver for me. Bought a decent sized tube of it way back when and since I only swap CPU's out about once a year now, it's lasted quite some time.
 
Originally posted by: Old Hippie
I tried that diamond stuff....one time.

When they talk about diamonds being one of the hardest substances ever known, that applies to this stuff too.

Talk about some resistance to being spread...kinda like cruncy peanut butter that's been sitting in the cold.

I gave the rest away.
Click to expand...

ahahahahahaha

i told people this so many times...

i even asked the guys for a real method... they said they impoved the forumla so its like a v2 to make it easier to apply.. also you dont need to let it sit out for 5 min.

Im with everyone else on this... you get what you yourself like and not what the person next to you like.

I personally love

TIM-Consulatants
MX-2
IC Diamond <if im bored>
Shin Etsu.
Ceramic if im going sub zero.
 
I use IC Diamond and found it to be the best I have ever used.
When it comes to the application, try warming it up in some hot water first this makes the application process much much easier.
 
Originally posted by: Gillbot
AS Ceramique and i use the grain of rice method.
Click to expand...

I'm using this also as my local Fry's was out of AS5 but I did what the website says and do a little line going with the cores.
 
I had always used Ceramique, and occasionally AS, but I tried some cheapo ($2) Radio Shack stuff the other day. It spread on differently than I'm used to (like half melted crisco), but so far I haven't noticed any difference between it and the more expensive stuff. Keeps an e7200 at ~23C in a 70F room.
 
Originally posted by: zerocool84
Originally posted by: Gillbot
AS Ceramique and i use the grain of rice method.
Click to expand...

I'm using this also as my local Fry's was out of AS5 but I did what the website says and do a little line going with the cores.
Click to expand...

Line/Grain of rice, it's basically the same method.
 
Originally posted by: viivo
I had always used Ceramique, and occasionally AS, but I tried some cheapo ($2) Radio Shack stuff the other day. It spread on differently than I'm used to (like half melted crisco), but so far I haven't noticed any difference between it and the more expensive stuff. Keeps an e7200 at ~23C in a 70F room.
Click to expand...

I've used silicon based compound quite a bit over the years, from transistors to cpu. I still recommend it for first time cpu installers. It is the easiest to apply and not screw up and it gets the job done 🙂
 
Arctic Alumina for me. Really cheap, easy to apply and clean up. For the most part I'm not going to miss a couple degrees.
 
Originally posted by: Old Hippie
I tried that diamond stuff....one time.

When they talk about diamonds being one of the hardest substances ever known, that applies to this stuff too.

Talk about some resistance to being spread...kinda like cruncy peanut butter that's been sitting in the cold.

I gave the rest away.
Click to expand...

Not only is it a huge pain in the butt to apply but if you screw it up its a ***** to clean as well. That said I find that it works as well as anything else. They suggest a pea sized amount. I remember not using enough and having the clean and reapply several times. Peas are bigger than you think.
 
I used Arctic MX-2 on my E2140 and A7FP. I applied a dot about the size of a rice grain to the center, no spreading. Due to my 100% OC never seeing a temp above 65C in stress testing and never above 50C in use of games/apps, I'd say it's quite effective
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top