• We should now be fully online following an overnight outage. Apologies for any inconvenience, we do not expect there to be any further issues.

What factors will help get me better overclocking results?

Scrapster

Diamond Member
Nov 27, 2000
3,746
0
0
I'm looking for a duron 600 to overclock, but I'm a little confused on what exactly I should be looking for.
Are all duron 600's the same?

Why is it that you see some duron 600's advertised as, 600@800, 600@913, 600@950, 600@1050?? Ofcourse I want my processor to be overclockable with the best, but what will help me do this? Are there some Duron's that will have better o/c'ing results than others? Do o/c'ing results have to do with other external things, like the kind of motherboard you have, cooling, ram, etc.. ?? I want to get a MSI K7T-PRO2-A. Do these motherboards have better o/c'ing results with specific duron cpu's?

I'm a confused little boy. Please guide me. :eek:

Scrapster
 

lane42

Diamond Member
Sep 3, 2000
5,721
624
126
scrapster, your best bet would be to get a duron pretested
to 900 or 1050. Overclocker store has these for a little more and will reach these speeds on any mb with mulitiplyer
setting and good cooling.
 

Phokus

Lifer
Nov 20, 1999
22,994
779
126
If i called up a store and ordered a duron, do you think they'll give me a "late week" duron if i asked for one?

(i really don't want to pay more for a duron that's been "Pre-tested" to oc to whatever mhz)
 

Losty

Golden Member
Oct 23, 2000
1,136
0
0
i got a duron that had the bridges connected already...those are the early ones right?
worked fine @ 9.0x100

for FSB oc'ing ram plays an important role i think...
for oc'ing in general...heat is one of your major enemies...get good cooling...
get a mobo with a bios that can change the mulitiplier and FSB like the abit kt7 or the msi kt7pro2
 

compuwiz1

Admin Emeritus Elite Member
Oct 9, 1999
27,112
930
126
The worst advice I have seen in this thread is doing business with The Overclockerz Store

Read the comments on them at resellerratings, where at least you were warned.

Edit: My faith in resellerratings just went in the toilet. I wonder who they paid off to remove the over 500 negative commments that were there just a week or so ago? :Q
 

lane42

Diamond Member
Sep 3, 2000
5,721
624
126
Compuwiz1, I guess i just got lucky then.:) I got a 600 duron@900, fast service and a good price.;)

But Thanks for the Tip.
 

gil11542

Platinum Member
Oct 20, 2000
2,931
0
0
I have dealt with that vendor got a 600 duron @ 950 no prob for 60.00 shipped I must have been lucky too
 

lane42

Diamond Member
Sep 3, 2000
5,721
624
126
Have my eye on there 1.2 TBird for $299, but i think ill
check into them- o\c store a little more first.
Thanks again Compuwiz1
 

Phokus

Lifer
Nov 20, 1999
22,994
779
126
Hmm, lemme rephrase that question: Has anyone here explicitely asked for and received a later week CPU before? And if so, where did you order from? I tried a couple of shops with no success :(
 

zision

Member
Jan 20, 2000
118
0
0
Do any vendors offer pretested durons with a permanent connection on the bridges? solder or similar. I'd gladly pay a few dollars more.