What do you have your FSB set at?

[beefjerky911]

im trying to mess around with my a7v133 board to find a perfect multiplier and fsb combination. right now im running at 145 x 7. i was wondering what boards you guys are running and what combinations.

btw its a default athlon 950 chip

 

[Colt45]

BX mobo @66 or 83 FSB depending on what mood im in

 

[beefjerky911]

i was wondering if 145 would kill my a7v133 board/system ???

 

[Colt45]

oh i see what you meant now..
sorry i dont have any experience with the modern AMD cpu's.
whats the board rated to go? what is the PCI/AGP at when it is at 145FSB?
you dont really want your PCI too far out of whack or you might get data corruption

 

[Jen]

i ran my Abit KT7A at 8.5 x 145 for close to a year before i upgraded. Current system i am just at 11.5 x 139 with full memory timeings. I suppose i could go higher but havent tried to



Jen

 

[WhiteWizard]

I was running my t. bird 1.2B at 10x133 (1333Mhz) in the A7V133, now I'm running at 9.5*140Mhz (1330Mhz) in the A7V266-E.

 

[mboy]

8kha+ 145 fsb locked xp1600 (10.5) @ 1533, not stable at anything over 146 or so for too long.
Running SETI 24/7 at this fsb so it is stable. Memory is full blast Turbo, cas 2, etc.

k7S5A 138fsb fastest ram settings. Xp1700 @ 1449. Hasn't crashed once!

 

[beefjerky911]

<< oh i see what you meant now..
sorry i dont have any experience with the modern AMD cpu's.
whats the board rated to go? what is the PCI/AGP at when it is at 145FSB?
you dont really want your PCI too far out of whack or you might get data corruption >>



it didnt have to be only amd systems, i was just wondering what other people are running and what kind of pros and cons they are getting as a result

 

[Jen]

on a Asus P3V4X i ran a 600e at 900 mhz.......150 fsb with only one problem and that was a reboot issue on this motherboard. which i later solved by disableing halt on all errors

on a Abit BF6 motherboard i ran it up to 143 FSB without any problems...........but it was maxing out my video card because there was no 1/2 divider at 133 bus for the agp



Jen

 

[salman327]

146.7 for 1.4@1539

 

[MistaTastyCakes]

150fsb x 10.5 on a 1.4 Thunderbird @ 1583mhz - 8KHA+

I have problems loading Windows about half the time at 152. I can't even post at 155. 150 seems to be my sweet spot.

 

[beefjerky911]

you guys all using 133 150 or 166 ram?

 

[JimMc]

145 on a Dragon +, could go higher but I'm not greedy . Using Cprsair PC 2400.

 

[RustyNale]

8KHA+ at 153fsb, using crucial 2100ram, 1600 running at 1900+

 

[Jen]

memory for me is Pc2400 corsair........and some fancy red pcb NANYA chips Pc2400 havent had a chance to play with this stuff



Jen