what are your thoughts on this art piece?

Naer

Diamond Member
Nov 28, 2013
3,482
182
106
acsc4l.jpg
 

phucheneh

Diamond Member
Jun 30, 2012
7,306
5
0
Someone gave a child a copy of Photoshop.

I would say 'MS Paint' based on the outer parts, but the stuff closer to the center appears to have needed rudimentary PS tools.
 

Mai72

Lifer
Sep 12, 2012
11,562
1,742
126
You could hang it in the jail cell that you're going to share with Mayne.

 

Malak

Lifer
Dec 4, 2004
14,696
2
0
This isn't art, it's what someone that doesn't know the point to art does.
 

master_shake_

Diamond Member
May 22, 2012
6,425
292
121
if you drew it you either have daddy issues or maybe some matricidal tendencies.

honest opinion.
 

phucheneh

Diamond Member
Jun 30, 2012
7,306
5
0
If that is indeed an attempt at art by the OP, I feel this is an appropriate venue to share what I did today while I was cleaning up.

a7bb6643_o.jpeg


Totally art, brah. Functional art, no less. If you consider a small table that weighs 100lbs 'functional.'

I've got a box of old valvetrain parts that I think I'm gonna weld into a spiderweb design between the crankshafts.:ninja:
 

master_shake_

Diamond Member
May 22, 2012
6,425
292
121
If that is indeed an attempt at art by the OP, I feel this is an appropriate venue to share what I did today while I was cleaning up.

a7bb6643_o.jpeg


Totally art, brah. Functional art, no less. If you consider a small table that weighs 100lbs 'functional.'

I've got a box of old valvetrain parts that I think I'm gonna weld into a spiderweb design between the crankshafts.:ninja:

pretty sure that is a balance shaft from a 4.3 on the right on top of that crankshaft.
 

phucheneh

Diamond Member
Jun 30, 2012
7,306
5
0
pretty sure that is a balance shaft from a 4.3 on the right on top of that crankshaft.

A solid guess; I'm sure the 4.3L part appears quite similar.

But it's out of a Ford 3.8L. Specifically, out of that van sitting in the background. :D

Somebody overheated the poor thing until the engine was completely ruined. Practically zero compression on every cylinder due to blown head gaskets (...also, a partially melted head on one sideo_O) and heavily scarred pistons/cylinder walls. All the those parts are from it except for the other crank, which I think was a Chevy 5.3L.
 

master_shake_

Diamond Member
May 22, 2012
6,425
292
121
A solid guess; I'm sure the 4.3L part appears quite similar.

But it's out of a Ford 3.8L. Specifically, out of that van sitting in the background. :D

Somebody overheated the poor thing until the engine was completely ruined. Practically zero compression on every cylinder due to blown head gaskets (...also, a partially melted head on one sideo_O) and heavily scarred pistons/cylinder walls. All the those parts are from it except for the other crank, which I think was a Chevy 5.3L.

nice

very nice lol