WAP/Router behind a router?

[Transition]

Hi everyone,

I've got a router (smc barricade) with a DLink Router/WAP hooked up.. I'm having problems getting the DLink configured properly to work behind the smc barricade. Heres my current config..



************ WAN ************

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

SMC Barricade Router LAN Addy ........ 172.16.50.1/16
DHCP Pool ........ 172.16.50.10-15

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

DLink Router Lan Addy ........ 172.16.50.2/16
DHCP Disabled

WAN Info:

IP Address ........ 172.16.50.14/24
Default Gateway ........ 172.16.50.1
DNS ........ 172.16.50.1

WAN configuration is set on dynamic right now and it looks
like it's pulling a WAN IP from the SMC's DHCP pool


^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^


I cannot ping the DLink device from a PC which is connected to the LAN through the Barricade. I had everything working fine when the SMC was setup with DHCP and so was the Dlink.. Although, just for fun i'd like to experiment a little and try to figure this out. Any help is appreciated.

- RJ

 

[JackMDS]

May be this can Help.

Link: How do I use a Wireless Cable/DSL Router as a Switch with an Access Point?

 

[Transition]

Ah perfect.. Exactly what i needed. I unplugged the WAN port and it works perfect! Thanks Jack