• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Venice OCing thread!

Page 13 - Seeking answers? Join the AnandTech community: where nearly half-a-million members share solutions and discuss the latest tech.
-=General Info=-
CPU Model Number: ADA3500DAA4BP
CPU Code: LBBLE ?????

-=System Info=-
Motherboard: DFI NF4 Ultra-D
BIOS Revision: 310
Memory: 2x512 OCZ PC4000 Gold VX (@250mhz 3.3V)
PSU: Antec NeoPower 480
Cooling Type, Brand, Model: Air, XP-90, Panaflo 90mm H1A

-=Stable OC Info=-
Max Stable OC: 2750 mhz
Prime95 SFFTs: 19:?? H:M
Prime95 LFFTs: N/A
HTT and Multiplier Used: 250 * 11
Actual VCore: 1.42V
CPU Temp in BIOS (Idle): ??
CPU Temp in OS (Idle):26C
CPU Temp Under Load: 34C
+12V Reading (Idle): 12.03V
+12V Reading (Load):12.03V

Current Stable. Burning in my memory alittle bit right now. My board seems to max out at 295 HTT and my chip maxed at around 2.9 (260 HTT 1.6v). I lose my 2-2-2-8 timing if/when I push my chip a little higher, but time will tell. I did this OC in about 3 hours the other night and haven't had time to really sit down and work on it. ~20 Hrs. Prime stable and 31 sec SuperPi 1M. I'm hoping to get my ram to 260 and run sync HTT.
 
Originally posted by: user1234
It seems like Avalon has disappeared !!!! maybe the disappointment got him down, and he took the only way he knows out of the situation......RIP
Click to expand...

Good one, dumbass.

:roll:

This thread fell off the front page, and I forgot about it.
There was no change at all as far as overclocking my chip. It'll prime stable all day long at 2.52ghz @ 1.425v, but requires 1.55v to prime at 2.61ghz. After that, it is no longer stable. Zalman shaved the idle temp down a degree, and the load temps down a couple degrees. Plus, it's quieter. I'm just going to leave my chip at 2.52 for now, which is more than what I purchased. I'm happy.
 
http://valid.x86-secret.com/show_oc?id=20748

Stable at 2.8. A little more cpu and ddr voltage and everything seems fine. Prime will tell the tale.

-=General Info=-
CPU Model Number: ADA3500DAA4BP
CPU Code: LBBLE ?????

-=System Info=-
Motherboard: DFI NF4 Ultra-D
BIOS Revision: 310
Memory: 2x512 OCZ PC4000 Gold VX (@255mhz 3.5V)
PSU: Antec NeoPower 480
Cooling Type, Brand, Model: Air, XP-90, Panaflo 90mm H1A

-=Stable OC Info=-
Max Stable OC: 2805 mhz
Prime95 SFFTs: Priming Now
Prime95 LFFTs: N/A
HTT and Multiplier Used: 255 * 11
Actual VCore: 1.52V
CPU Temp in BIOS (Idle): ??
CPU Temp in OS (Idle):26C
CPU Temp Under Load: 39C
+12V Reading (Idle): 12.03V
+12V Reading (Load):12.03V
 
ZipZoomFly Purchase on 06/18/05

A643000+ Venice @ 2700MHZ
LBBLE 0521 CPMW
300X9
DDR 2.5 3 3 8 1T @400MHZ
VCore 1.6
VDimm 2.8
Chaintech VNF4 Ultra w/ 03/15/05 Bios
 
=General Info=-
CPU Model Number: ?? AMD 3000+ Venice core
CPU Code: LBBLE 0520

-=System Info=-
Motherboard: DFI NF4 Ultra-D
BIOS Revision:
Memory: 2x256 Corsair XMS CAS2
PSU: XCLIO 450w
Cooling Type, Brand, Model: STOCK

Currently Priming at 2.75ghz 🙂
 
General Info=-
ADA3000DAA4BP
LBBLE 0519

-=System Info=-
Motherboard: DFI NF4 Ultra-D
BIOS Revision: 704-2
Memory: 2x512 Mushkin Blue Line C2 (BH5 UTT) 2-2-2-6@200mhz 3.1V
PSU: Enermax 485W Noisetaker
Cooling Type: Stock but I've been offered a CNPS7700-AlCu or XP-90 in a trade

-=Stable OC Info=-
Max Stable OC: 2600 mhz
Prime95 SFFTs: 13:?? H:M
Prime95 LFFTs: 12:?? crashed some point in the niught
HTT and Multiplier Used: 289 * 9
Actual VCore: 1.485V
CPU Temp in BIOS (Idle): ??
CPU Temp in OS (Idle):36C
CPU Temp Under Load: 50C
+12V Reading (Idle): 12.22V (multimeter)
+12V Reading (Load):12.20V (multimeter)

The cpu can go higher 2.65-2.7 at 1.55 volts



 
I'm new to overclocking and have some questions. But first, here are the specs for my system:

3200+
ADA3200DAA4BP
LBBLE 0518DPAW
Z646086E51933
2.6Ghz - 10x260
vcore - 1.525v
temp under load: ~50 degrees celsius
cooling - Zalman 7700Cu
OCZ VX @ DDR 520, 2-2-2-8
DRAM voltage - 3.6
DFI Lanparty Ultra-D

This seems to be a stable overclock. I can do Super PI 32M in 28m 24.344s. I've tried doing some tests with Prime95 too. I only let it run for 30-45 minutes, but there were no errors. I've also played Battlefield 2 for awhile and there were no problems.
I'm hoping to get a better OC than 2.6Ghz, but I'm unsure about increasing the vcore any more. I understand that setting the vcore too high will negatively affect the processors ability to be overclocked and might ruin it completely. What is a safe limit?
Also, I heard that increasing the chipset's voltage makes for a better overclock. Is this true?
I'd also like to hear any other tips you might have to get better performance out of my system.
Thanks for your help
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top