• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Venice clocks getting better...

Sold my LBBLE 0516 to a friend.. System in sig..


Got a LBBLE 0515 and stable @ 2700mhz P95 over 11 hours now..

My other system couldnt run 2700 for more than 1 hour..

My ram is holding me back, I can boot at 310 and run prime for a bit, but my memory craps out even with the 100 divider.

I think I can get 2800mhz stable..

Stil @ 1.54v -1.56


He has the same chip as i Do.. 1.65 is just too high though..
 
There are some awesome overclocks in therre.. I can't wait to switch this ram out and go for a solid 2.8.. Some of those guys just use TOO much voltage... 1.68, 1.75 :Q

I'll try a suicide 2.9 or 3ghz but I don't know if that will happen!

Should be able to swap ram today!
🙂
 
Originally posted by: RichUK
hmmmm ... the SD is still where it is at tho .. 1Mb L2 cache 😀
Click to expand...

Definitely..

I personally don't think the extra 512k of cache is worth $200+

But to each his own..
 
Received a 3200+ CBBLE 0512 yesterday from newegg - so far 2.6GHz @ stock voltage, 6 hours prime95 and counting.
 
NIce....If thi was the highest you could reach at default vcore you could likely hit 2.75ghz with 1.54v and perhaps 2.8ghz with 1.6v.....Good luck!! Make sure you run some metest and other apps other the prime95 cause I have passes prime to get eeors in memtest (windwos version) and then get and occasionaly stability issue. I dont prime95 as a sole tester and not a good ram tester....

I have to agree Zebo in the last 4 days I have heard more ppl getting 2.6-2.7's on default vcore again....
 
2909!!!

Prime crashed in about 5 minutes though... Didn't even try 1.6v

I think I can suicide 3ghz though!!!

Priming @ 2817...

Got the OCZ rev.2

Will push the memory tonight...

EDIT: Prime ran for 2 hours before I had to shut it off and bring it home ( was at work..)

Just for the overnight run, i backed it down to 2808, I'm almost positive it's going to make it through the night..!

Hopefully!
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top