Using a 3 to 4 pin cpu fan adapter on kt7raid, help!

[MortaniuS]

I try to use a 3 to 4 pin adapter on my kt7raid for my delta and all i get is beeps (guessing its a thing to warn that ur cpu fan isnt werking) any ideas how to disable this protection?

 

[Klosters]

Assuming that you want to connect your Delta to your main power "daisy chain," use a Molex connector that has a TWO pin little adapter. They look like the three pin fan risers on your mainboard, but have one pin missing. If you're in a hurry, take a regular Molex to Molex extender or "jumper," and cut one Molex plug off of it. Splice the fan's red wire to the Molex yellow wire. And splice the fan's black wire to the black wire of the Molex connector that's next to the yellow wire. Fold the fan's blue wire and insulate it so that it can't touch anything. One of the two pin to Molex adapters is a lot more elegant. If this is a Delta 38 cfm fan, don't even think about connecting it to a motherboard fan riser.

 

[rempe]

Its in the bios also you can run youre delta off the mb header on a abit
ive been running mine for months.Its one of the few boaeds that you can.
Also the wz bios disables the fan detection by default