Up voltage on 2500 mobile on gigabyte ga-7n400 pro2 rev 2.0

[henan]

Allright, i really need some help in raising the voltage on my cpu. I have a gigabyte ga-7n400 pro2 rev 2.0 with a mobile XP 2500. Running prime stable at 210x11@1.7 vcore. The board only overvolts up to +10%, meaning 1.45 v * 1.1 = 1.6 v. Why i get 1.7 i don't know, all monitoring programs tell me the same. I heard my board overvolts a bit. But i really want to go higher!

Can anyone help me in rasing the voltage on my cpu? Also, max vdimm is +0.2 v, but also overvolted 0.1 v seems like. So far my experiences with this board are no good at all...

 

[SickBeast]

Sounds like you're gonna need a voltmod or else hacked drivers.

Actually, I think there is also a wire trick that may work for you.

 

[henan]

Good idea with the wire trick! I'll try it when i get back from vacation, leaving tomorrow. thanks sickbeast!

 

[henan]

btw, i've searched all over for a vmod or alternate bios to change voltages with no luck. Is it difficult to figure out my own vmod?

 

[SickBeast]

Figuring out your own vmod is definately not reccomended. You can either do the wire trick or else modify your CPU bridges. I would try the wire trick and set the default to 1.75v or so. :beer: