Unlocking the New green Tbred....HOW in the

[bluemax]

I have the exact same chip.... I might want to try this.... 🙂

 

[Johnbear007]

Why is anyone buying anything accept for 2500+ bartons? I would sell your chip and get one. They are practically guaranteed 3200+

 

[zikronix]

well a start would be the fact THEY WONT RUN IN MY BOARD ive tried...

 

[Boonesmi]

what board are you using? reading through your above posts you got me confused 🙂

 

[InlineFive]

Originally posted by: zikronix
well a start would be the fact THEY WONT RUN IN MY BOARD ive tried...

Because the KT333 chipset can't support a 333FSB much less talking about 400FSB for the 3200+. That's why the 2100+ works, because it uses the 266FSB.

-Por

 

[Johnbear007]

I would have sold off the kt333 board and gotten an nforce 2. You can get a great nforce 2 board fro 60 - 70 $

 

[txxxx]

The Wire Trick does work, although requires some tweasers or some VERY fine hands (looks at photo of girlfriend 😀).

 

[zikronix]

well thats you. The price i paid for the soyo dragon ultra platinium KT333 New was 10.00 you cant beat that price unless it was free. and i picked up the processor from new egg for 50.00 so what you spent on a mobo I bought both. I picked up a Gig of crucial ddr for PC2700 125.00 that will oc quite nice. Im not complaining. back to my original problem why did adjusting the voltage fry my processor.

 

[nCred]

Originally posted by: txxxx
The Wire Trick does work, although requires some tweasers or some VERY fine hands (looks at photo of girlfriend 😀).

The wire trick does NOT work on the new T-breds, I tried it on my new 2400+.
So now i´m stuck at 150 mhz fsb.
🙁

 

[Brian48]

Originally posted by: PorBleemo

Originally posted by: zikronix
well a start would be the fact THEY WONT RUN IN MY BOARD ive tried...

Because the KT333 chipset can't support a 333FSB much less talking about 400FSB for the 3200+. That's why the 2100+ works, because it uses the 266FSB.

-Por

Actually the KT333 does support 333FSB, but your particular motherboard might be locked from doing so (can't imagine why). It even comes with the 1/5 divider that kicks in at 166mhz or above so the rest of your system is running at nomimal speeds. My 8k3a ran perfectly fine at 12x166 (333mhz) with my 1700XP prior to me upgrading to a nForce2.

 

[zikronix]

nein ive read high and low and i cant find anyone that has gotten it to post