Unknown Cpu Type

Ech0

Junior Member
Feb 18, 2005
18
0
0
I just installed a AMD Athlon XP Barton 3000+ on my pc. WHen i boot it up I see Unknown Cpu Type, and i see 1.7 GHz instead of 2.1 GHz. Does anyone know the reason. If so plz reply

Thanks
 

Furen

Golden Member
Oct 21, 2004
1,567
0
0
If I had to take a wild guess I'd say that your motherboard doesnt support it so it runs it at 333 FSB instead of the original 400, underclocks it by around 17%. If the motherboard supports 400MHz FSB, you just need to raise the FSB to 400 to get to your correct clock speed, if not then you'd need a new motherboard, I think.
 

Lonyo

Lifer
Aug 10, 2002
21,938
6
81
FSB is set to 133 and not the 166MHz it should be (IIRC for that chip), so you need to change a jumper to 166MHz from 133MHz. Or your mobo may not support it and need a BIOS update.
 

Powermoloch

Lifer
Jul 5, 2005
10,084
4
76
Try download a program cpu-z / cpu-id / sis sandra / everest to check what kind of proc. you have atm.
 

Ech0

Junior Member
Feb 18, 2005
18
0
0
thanks for the reply.
Lonyo how would i set my FDB to 166MHz i have no idea how to change it.
 

o1die

Diamond Member
Jul 8, 2001
4,785
0
71
When posting, hit the "del" key to enter the bios. Look for a section titled "frequency and voltage control" or "advanced settings". If not, just check each section until you find the "cpu fsb". Change it to 166 and use F10 (save and exit).
 

Soggysocks

Golden Member
Jun 20, 2001
1,250
0
0
Ech0, Ech0,,ech0,,,,,,ech0,,,,,,,,echo

If you want an answer to your question.............then post some spec's .......motherboard make, model, and revision.....or If you have a store bought 'puter....then a make and model.

Or, if you are just looking for hints...........Furen and Lonyo have the best guess.