Tyan Thunder LE(S2510), need some help

TheNeck

Senior member
Sep 12, 2000
431
0
0
when i try to boot up the computer, the lights on the 2 onboard connectors, just keeping flashing. and it makes a beeping noise, kinda like a siren. i tried to go to tyan's website, but it seems to be down. thanks for the help.
 

joemama

Member
Oct 16, 1999
120
0
0
Not a lot of info to go by. I know it sounds elementary but if you don't POST it's most likely a hardware problem. Check all the connectors to the mobo, HD. If there are a series of beeps it could be a code telling you what's wrong, check the mobo manual. If all the connectors are tight and the cards, RAM and processor are seated properly then take a card at a time out until it boots. If it does then the last card out is the culprit. Also what is the last thing you did to the sytem before this happened ?.....check that