TR New Monster, Silver-Arrow SB-E in da house

[1pagebook]

Well This one should be the first show up here in the USA forum (I am not sure) but who cares? The most important thing is I bring this in front of you guys to share..

Bench reesults will be later on. Pictures first,
well I know I got bad skill for taking photos, so if you need any more angle for this cooler, please let me know.🙂

The retail box

inside the package

Ty-150 on the left and ty140 on the right

The all new mounting tool set

all angles shots

what a mirror surface ...

 

[1pagebook]

By far this one should be the king...



Test bed:
Intel I7-3960x 6c/12t enable
Asus Rampage IV extreme bios 1201
VGA: AMD Radeon 7970
Memory : Samsung DDR2400(OC from 1333 HCH9) 1.65v C9-11-11-28
PSU :Corsair AX1200W
BIOS fan speed controller set at (1200RPM)

temp. monitor software: Real Temp GT 3.7

testing software:

hyper pi 32m "16" threads
futuremark 3d vantage
futuremark 3d11
ambient temp. 16c

** in the middle running of Hyper pi 32m 16 threads

took the screen from camera:

completed:

now 3D full loaded:

3d vantage

add on 3d11:

 

[lsv]

What chip are you benching with? Also drool.

Edit - that TY-150 it comes with, what are the mounting holes on it? 120mm? 140mm?

 

[1pagebook]

What chip are you benching with? Also drool.

Edit - that TY-150 it comes with, what are the mounting holes on it? 120mm? 140mm?

3960x😉

hole to hole is 12cm..and also 10cm.. for another position
so it's not equally square to all size

 

[1pagebook]

For the installation:

 

[RussianSensation]

You know it ain't an amateur review when you see a "wolf in sheep's clothing" 30nm DDR3 sticks on an Asus Rampage IV board with a 3960X and SB-E 😉

Looking forward to your results.

@ Computerbase, Phanteks edged the SB-E.

@ Xbitlabs, Phanteks also took every air cooler down (but they didn't test the new Silver Arrow SB-E yet).

 

[1pagebook]

You know it ain't an amateur review when you see a "wolf in sheep's clothing" 30nm DDR3 sticks on an ROG board with a 3960X and SB-E 😉

Looking forward to your results.

@ Computerbase, Phanteks edged the SB-E.

you'da expert😉

those 4 sticks rock solid @ 2600 C10, 2400 9-11-11-28 @ 1.635v

 

[1pagebook]

get it on, still will block high profile memory heatsink for sure..😀

 

[Jman13]

I still don't know why they take such a beautiful heatsink and they provide what are, in my opinion, the ugliest fans that have ever been created for a computer.

 

[1pagebook]

I still don't know why they take such a beautiful heatsink and they provide what are, in my opinion, the ugliest fans that have ever been created for a computer.

for me the appearance of fan doesn't matter that much though😉

 

[cantholdanymore]

Nice shots but a comparison one would have been very helpful. Like with a can of beer on the side:thumbsup:

 

[dmoney1980]

is the first PCI-E slot usable with the fan on the heatsink? those fans look very wide

 

[1pagebook]

I have a thread already compare the results of them, will add this one when I finish bench🙂

for the 1st pcie slot, mostly the tower type require 14cm fan mounting will be not available.🙂

 

[1pagebook]

bench results on #2 reply

 

[jpeyton]

Looks like it's about 1-2C better than the Phanteks.

 

[Piano Man]

Looks good. TIM type and noise levels please!!!

 

[deees]

Please include a side elevation photo. What if you remove the top cooling fin on the Dominators?