TR New Monster, Silver-Arrow SB-E in da house

[1pagebook]

Well This one should be the first show up here in the USA forum (I am not sure) but who cares? The most important thing is I bring this in front of you guys to share..

Bench reesults will be later on. Pictures first,
well I know I got bad skill for taking photos, so if you need any more angle for this cooler, please let me know.

The retail box

inside the package

Ty-150 on the left and ty140 on the right

The all new mounting tool set

all angles shots

what a mirror surface ...

 

[1pagebook]

By far this one should be the king...



Test bed:
Intel I7-3960x 6c/12t enable
Asus Rampage IV extreme bios 1201
VGA: AMD Radeon 7970
Memory : Samsung DDR2400(OC from 1333 HCH9) 1.65v C9-11-11-28
PSU :Corsair AX1200W
BIOS fan speed controller set at (1200RPM)

temp. monitor software: Real Temp GT 3.7

testing software:

hyper pi 32m "16" threads
futuremark 3d vantage
futuremark 3d11
ambient temp. 16c

** in the middle running of Hyper pi 32m 16 threads

took the screen from camera:

completed:

now 3D full loaded:

3d vantage

add on 3d11:

 

[lsv]

What chip are you benching with? Also drool.

Edit - that TY-150 it comes with, what are the mounting holes on it? 120mm? 140mm?

 

[1pagebook]

What chip are you benching with? Also drool.

Edit - that TY-150 it comes with, what are the mounting holes on it? 120mm? 140mm?

3960x

hole to hole is 12cm..and also 10cm.. for another position
so it's not equally square to all size

 

[1pagebook]

For the installation:

 

[RussianSensation]

You know it ain't an amateur review when you see a "wolf in sheep's clothing" 30nm DDR3 sticks on an Asus Rampage IV board with a 3960X and SB-E

Looking forward to your results.

@ Computerbase, Phanteks edged the SB-E.

@ Xbitlabs, Phanteks also took every air cooler down (but they didn't test the new Silver Arrow SB-E yet).

 

[1pagebook]

You know it ain't an amateur review when you see a "wolf in sheep's clothing" 30nm DDR3 sticks on an ROG board with a 3960X and SB-E

Looking forward to your results.

@ Computerbase, Phanteks edged the SB-E.

you'da expert

those 4 sticks rock solid @ 2600 C10, 2400 9-11-11-28 @ 1.635v

 

[1pagebook]

get it on, still will block high profile memory heatsink for sure..

 

[Jman13]

I still don't know why they take such a beautiful heatsink and they provide what are, in my opinion, the ugliest fans that have ever been created for a computer.

 

[1pagebook]

I still don't know why they take such a beautiful heatsink and they provide what are, in my opinion, the ugliest fans that have ever been created for a computer.

for me the appearance of fan doesn't matter that much though

 

[cantholdanymore]

Nice shots but a comparison one would have been very helpful. Like with a can of beer on the side:thumbsup:

 

[dmoney1980]

is the first PCI-E slot usable with the fan on the heatsink? those fans look very wide

 

[1pagebook]

I have a thread already compare the results of them, will add this one when I finish bench

for the 1st pcie slot, mostly the tower type require 14cm fan mounting will be not available.

 

[1pagebook]

bench results on #2 reply

 

[jpeyton]

Looks like it's about 1-2C better than the Phanteks.

 

[Piano Man]

Looks good. TIM type and noise levels please!!!

 

[deees]

Please include a side elevation photo. What if you remove the top cooling fin on the Dominators?