Think I found close to my best performance for my K8N Neo4

[willyg43]

Hey all been tinkering with my board fer a while now. Was ablt to drop my HTT to 3 x and do 300MHz, got my CPU to 2.7GHz, and plus got my ram all the way to 600MHz at really loose settings but still with 1T.

I saw a boost over my original Oclock at 220x10 and ram at tight timings, but it didnt seem as much as I thought, so I tried in between these two extremes and seem to be getting my best performance so far at CPU 250x10, HTT 250x4, Ram 500MHz 2.5-3-3-7 1T.

My 3dmark01 went from 17K(stock) -> 20K(220x10) -> 21K(290x9) -> 22K (250x10), and my bandwidth is up close to 7Gb/s in Sandra from like 5.3 at stock

 

[HannibalTheCannibal]

Awesome. I cannot wait to get my NEO4 goin end of the month. Its just sittin there lookin at me with its high-fallutin package

Those are good scores. From what I have seen, the area you reached seems to be a ceiling for most others too. 250x4
Are your dividers at 1:1? The ram is at 1T?

 

[darkeyed]

Hey I have had problems getting mine to run above 230. Where in the BOIS do you set and turn on the PCI lock and which SATA ports are locked? I am wondering if that is my problem. whenever I turn up my clock above 235 the system will not post. Even when my CPU is at 8X and my memory is at 166 2T. If I stay at 230 and below my memory runs 1:1 at 2-2-3-8 at 1T and cpu is fine at 10X.