Thermalright 775 Bolt-Thru Kit Compatibility with Big Typhoon

[crapfest]

I'm currently using a Thermaltake Big Typhoon on my socket 939 system, and I'm looking to ugprade to a new 775 system (probably with a DS3L mobo, if it matters). Since the Big Typhoon is 775 compatible, I thought I would save a couple of bucks by reusing it in my new build. My main issue with this cooler is the four mounting screws because it's nearly impossible to get the cooler base in perfect contact with the heatspreader (due to being able to adjust screws as much as you want). I noticed in newer heatsinks that the screws holding down the mounting bracket all have springs, creating balanced forces across the cooler base and therefore keeping it level across the heatspreader. This is highly desirable, since I intend to overclock with my new system.

I was wondering if it's possible to use the Thermalright 775 Bolt-Thru kit in conjunction with the Big Typhoon. Thanks in advance for your replies.

 

[crapfest]

I heard from a buddy that this isn't possible, so it looks like I'll either deal with the screws as they are or get a new heatsink. I've heard good things about the Arctic Cooling Freezer 7 Pro in that it's a very powerful cooler for a low price. My goal is to get a Q6600 G0 to 3ghz - will this be enough to do it and keep everything stable? Thanks

 

[CP5670]

It's not that hard to get all four screws balanced properly. I found it easiest to to do two opposite corners first and then get the other two. If you keep a rough mental count of how many rotations you're making with each nut, they should balance out pretty well. Just make sure you use a hex bit or a small wrench to tighten the nuts instead of doing it by hand.