thanks

[Corsairpro]

I tried searching but couldn't find any info on whether this cpu is a tbred B and how well it will overclock:

AXDA2100DUT3C
AIUHB 0249

any help would be appreciated. I purchased this at newegg.com

 

[tnt2]

AIUH(B). 0249 --> 2002, week 49.

 

[AtomicDude512]

Originally posted by: Corsairpro
I tried searching but couldn't find any info on whether this cpu is a tbred B and how well it will overclock:

AXDA2100DUT3C
AIUHB 0249

any help would be appreciated. I purchased this at newegg.com

Throughbred-B. You can tell by the U in it's name, most Palominos and Throughbred-A have K or L there. You can probably jump straight to 166FSB with almost no voltage boost.

 

[bergenvr6]

I have a AIUHB0304. Right out of the box, ran it at 166x13. tweaking some more right now to get some more MHz out of this bad boy

 

[chizow]

With quality components and good cooling (HSF and case cooling), 2200-2300+ MHz is easily attainable.

Run a search on 2100+ and you'll find multiple results threads with gobs of info and settings used. There's a large enough user base now that you'll probably be able to find someone with nearly the same components you are using.

Chiz

 

[Corsairpro]

cool thanks, I have an sk7 and an 8cm fan on it.... it ran 13x166 no problem on the nForce2 board w/ pc2700 mem. I think I'll stick w/ that overclock for now since nothing except the cpu is above spec.

Thanks

 

[ChampionAtTufshop]

Originally posted by: AtomicDude512

Originally posted by: Corsairpro
I tried searching but couldn't find any info on whether this cpu is a tbred B and how well it will overclock:

AXDA2100DUT3C
AIUHB 0249

any help would be appreciated. I purchased this at newegg.com

Throughbred-B. You can tell by the U in it's name, most Palominos and Throughbred-A have K or L there. You can probably jump straight to 166FSB with almost no voltage boost.

actually, the 2400+ has a K i think ...i think its DKV3C or something...
i believe that denotes the default voltage, not stepping
easiest way, if stepping ends in a B, then its a B ....at least thatsthe case so far (and i have no reason to doubt why it wouldnt contineu...unless amd pulls a fast one)

but for the 2100+ and lower, DUT3C=tbred b

 

[cabains]

i have the same chip, also from newegg, its a good chip you should be able to get more out of it (that is if you want). im stable at 13.5 * 180 @ 1.775v. for some reason i cant seem to get above 180 fsb. i think it might have something do with the mobo (8rda+), but then again i have seen people run the same board at over 200 fsb, so maybe i have hit the max for the chip. who knows.

 

[Megatomic]

I just had my 2100+ Tbred "B" week 0301 running at 18x133MHz (2400MHz CPU freq.)!! I have a WCPUID to prove it. Unfortunately it wasn't stable so the hightest I could run it at on 133MHz FSB is 2272MHz. That's a 542MHz overclock with average components.

8RDA+, Tbred "B" 2100+, Coolermaster HHC-001 (muted with a nice fan).

Right now I am ramping up the FSB to see where it tops out at FSBwise. Right now it is running Prime95 sweetly. Another 15 minutes or so and I'll run a 3DMark2001SE. If that works out, I'll bump up to 155MHz FSB. And so on...