• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Tekram 390UW3 (SCSI adapter) - how to set to 33MHz mode??

Thank you for the non-answer. I read the manual, thank you very much, which by the way has a misprint (as referenced on their site). And it appears to me that by removing these pins you set it to 33MHz PCI mode. But it's not going into the SCSI BIOS on bootup - so something's not set right. So I'm trying to verify that the jumpers do indeed need to be removed, minus your smart assed remarks.

-J
 
I am guessing it does it automaitcally, I put mine in and only have trouble so far,,,

Well I am hoping to get it to work...
 
If anyone with the same card or who has worked with it can verify the removal of JP1 & JP2 is necessary to enable 33MHz mode I'd very much appreciate it. I build a lot of systems but this is my first SCSI and it's just not cooperating. 🙂

-J
 
Sorry to hear that. I would have thought it was auto too but on page 14 of the User's Manual it seems to clearly imply those pins need to be removed (I think, anyway - it's a diagram). There's a misprint there - JP1 and JP2 are reversed. But even then I'm not sure that would matter because it seems both need to be removed anyway.

-J
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top