I purchased an IBM 46GB 7200RPM ATA100 HD along with a SIIG UltraATA/100 controller.
This is what was in my system before installing the card and HD:
Asus P3V4X with P3-600E o/c to 840
128 MB PC133 RAM
15GB 7200RPM Western Digital ATA/66
ATI Radeon 64MB VIVO
Soundblaster Live!
Intel 10/100 Pro+ NIC
Gulliemot Maxi Fortismo Sound Card
Toshiba 48X and HP 10x4x32 CDRW
100MB IDE Zip Drive
Everything in the system is IDE, no SCSI.
After installing everything, the hard drive works, however, when trying to bring up properties on the drive, or trying to bring up any burning software, the system hangs, mouse and all for about 10 secs, before coming back to life.
I think that it has something to do with a conflict. I am not sure where to begin though. Here is how the IDE devices are setup right now.
Onboard IDE: Primary has 15GB HD and Zip Drive
Onboard IDE: Secondary has the CD and CDRW drives
UltraATA/100: Primary has the 46GB HD
Nothing on the secondary.
Here is the IRQ assigning right now as well.
00 - System Timer
01 - Keyboard
02 - Programmable Interrupt Controller
03 - COM2
04 - COM1
05 - Maxi Sound Fortissmo
05 - ACPI IRQ Holder for PCI IRQ Steering
05 - UltraATA/100 Controller
05 - Primary CMD Ultra DMA Bus Master IDE Controller
06 - Floppy Controller
07 - LPT1
08 - System CMOS
09 - Intel 10/100 NIC
09 - VIA Tech 3038 PCI to USB
09 - ACPI IRQ Holder for PCI IRQ Steering
09 - SCI IRQ used by ACPI Bus
10 - Soundblaster Live!
10 - ACPI IRQ Holder for PCI IRQ Steering
11 - Radeon DDR
11 - ACPI IRQ Holder for PCI IRQ Steering
12 - Wheelmouse (PS/2)
13 - Numerica Data Processor
14 - VIA Bus Master PCI IDE Controller
14 - Primary IDE Controller (dual fifo)
15 - Seconday IDE Controller (dual fifo)
15 - VIA Bus Master PCI IDE Controller
I am sorry about the length, but I would like to know if anyone has any suggestions to solve this if possible, and what possible solutions for switching resources....
Thanks,
Matt.
This is what was in my system before installing the card and HD:
Asus P3V4X with P3-600E o/c to 840
128 MB PC133 RAM
15GB 7200RPM Western Digital ATA/66
ATI Radeon 64MB VIVO
Soundblaster Live!
Intel 10/100 Pro+ NIC
Gulliemot Maxi Fortismo Sound Card
Toshiba 48X and HP 10x4x32 CDRW
100MB IDE Zip Drive
Everything in the system is IDE, no SCSI.
After installing everything, the hard drive works, however, when trying to bring up properties on the drive, or trying to bring up any burning software, the system hangs, mouse and all for about 10 secs, before coming back to life.
I think that it has something to do with a conflict. I am not sure where to begin though. Here is how the IDE devices are setup right now.
Onboard IDE: Primary has 15GB HD and Zip Drive
Onboard IDE: Secondary has the CD and CDRW drives
UltraATA/100: Primary has the 46GB HD
Nothing on the secondary.
Here is the IRQ assigning right now as well.
00 - System Timer
01 - Keyboard
02 - Programmable Interrupt Controller
03 - COM2
04 - COM1
05 - Maxi Sound Fortissmo
05 - ACPI IRQ Holder for PCI IRQ Steering
05 - UltraATA/100 Controller
05 - Primary CMD Ultra DMA Bus Master IDE Controller
06 - Floppy Controller
07 - LPT1
08 - System CMOS
09 - Intel 10/100 NIC
09 - VIA Tech 3038 PCI to USB
09 - ACPI IRQ Holder for PCI IRQ Steering
09 - SCI IRQ used by ACPI Bus
10 - Soundblaster Live!
10 - ACPI IRQ Holder for PCI IRQ Steering
11 - Radeon DDR
11 - ACPI IRQ Holder for PCI IRQ Steering
12 - Wheelmouse (PS/2)
13 - Numerica Data Processor
14 - VIA Bus Master PCI IDE Controller
14 - Primary IDE Controller (dual fifo)
15 - Seconday IDE Controller (dual fifo)
15 - VIA Bus Master PCI IDE Controller
I am sorry about the length, but I would like to know if anyone has any suggestions to solve this if possible, and what possible solutions for switching resources....
Thanks,
Matt.
