Surround sound not working properly on X-fi

Chefuk

Member
Jun 19, 2007
30
0
0
I can't figure it out. The cables are correct yet when i test them out the center comes out the left and the left is centered. Right is very quiet aswell. when i switch the center cable and front cable around, center becomes correct but the fronts dont work at all. Below is my spec and set up.

-------------
Sound Devices
-------------
Description: SB X-Fi Audio [9C00]
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1102&DEV_0005&SUBSYS_00211102&REV_00
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: ctaud2k.sys
Driver Version: 6.00.0001.1283 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 2/25/2008 09:43:24, 524312 bytes
Other Files:
Driver Provider: Creative
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 1, 192000
Static/Strm HW Mix Bufs: 128, 128
Static/Strm HW 3D Bufs: 128, 128
HW Memory: 0
Voice Management: Yes
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: The tests were cancelled before completing.

Description: Bluetooth AV Audio
Default Sound Playback: No
Default Voice Playback: No
Hardware ID: {F12D3CF8-B11D-457e-8641-BE2AF2D6D204}\BLUELETAUDIO
Manufacturer ID: 65535
Product ID: 65535
Type: WDM
Driver Name: blueletaudio.sys
Driver Version: 6.00.0013.0061 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 5/11/2007 04:10:50, 34704 bytes
Other Files:
Driver Provider: IVT Corporation
HW Accel Level: Full
Cap Flags: 0xB5B
Min/Max Sample Rate: 8000, 48000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: Not run

Description: Bluetooth SCO Audio
Default Sound Playback: No
Default Voice Playback: No
Hardware ID: {F12D3CF8-B11D-457e-8641-BE2AF2D6D204}\BLUELETSCOAUDIO
Manufacturer ID: 65535
Product ID: 65535
Type: WDM
Driver Name: BlueletSCOAudio.sys
Driver Version: 6.00.0012.0056 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 3/5/2007 07:00:04, 27792 bytes
Other Files:
Driver Provider: IVT Corporation
HW Accel Level: Full
Cap Flags: 0x959
Min/Max Sample Rate: 8000, 8000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: Not run

---------------------
Sound Capture Devices
---------------------
Description: SB X-Fi Audio [9C00]
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: ctaud2k.sys
Driver Version: 6.00.0001.1283 (English)
Driver Attributes: Final Retail
Date and Size: 2/25/2008 09:43:24, 524312 bytes
Cap Flags: 0x41
Format Flags: 0xFFF

Description: Bluetooth AV Audio
Default Sound Capture: No
Default Voice Capture: No
Driver Name: blueletaudio.sys
Driver Version: 6.00.0013.0061 (English)
Driver Attributes: Final Retail
Date and Size: 5/11/2007 04:10:50, 34704 bytes
Cap Flags: 0x41
Format Flags: 0xCCC

Description: Bluetooth SCO Audio
Default Sound Capture: No
Default Voice Capture: No
Driver Name: BlueletSCOAudio.sys
Driver Version: 6.00.0012.0056 (English)
Driver Attributes: Final Retail
Date and Size: 3/5/2007 07:00:04, 27792 bytes
Cap Flags: 0x41
Format Flags: 0x4

-----------
DirectMusic
-----------
DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
DLS Version: 1.00.0016.0002
Acceleration: Enabled
Ports: SB X-Fi DMusic Synth [9C00], Hardware (Kernel Mode), Output, DLS, Internal, Default Port
SB X-Fi Audio [9C00], Software (Kernel Mode), Output, DLS, Internal
Bluetooth AV Audio, Software (Kernel Mode), Output, DLS, Internal
Bluetooth SCO Audio, Software (Kernel Mode), Output, DLS, Internal
Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
SB X-Fi Synth A [9C00] [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
SB X-Fi Synth B [9C00] [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal
Registry: OK
Test Result: Not run
-------------

I'm using a Medusa 5.1 Home Edition headset plugged in to the X-fi