I did my first OC tonight, brought the 1.8a to 2.4 (133fsb) with 1.5 voltage, it was not stable until I got the voltage to 1.575 but now it does not crash after 3d2001se (2 runs) and Sandra Burn-in running for a 1/2 hour. So I guess I got it right (see note). My 3d Mark went up about 650 points which I think?? is pretty good.
I was wondering what my AGP Clock and Differential Current should be. I have the AGP clock at 2/3 and the Differential Current at 6. (Do you oc the memory buy changing the Diff Current?)
NOTE: The abit mobo manual states: that its highly recommended not to set the RDRam Bus Frequency to 400mhz if you are using PC-800 RDRam and setting the FSB > 125. I am running it at 400!, should I not be? I don't want to run it at 300 do I??? And Auto brings it to 399 at crashes!!
Any feedback is greatly appreciated.
SF
abit th7II
512 16 Device RDRam
ATI AIW 8500dv
p4 1.8a
I was wondering what my AGP Clock and Differential Current should be. I have the AGP clock at 2/3 and the Differential Current at 6. (Do you oc the memory buy changing the Diff Current?)
NOTE: The abit mobo manual states: that its highly recommended not to set the RDRam Bus Frequency to 400mhz if you are using PC-800 RDRam and setting the FSB > 125. I am running it at 400!, should I not be? I don't want to run it at 300 do I??? And Auto brings it to 399 at crashes!!
Any feedback is greatly appreciated.
SF
abit th7II
512 16 Device RDRam
ATI AIW 8500dv
p4 1.8a
Facebook
Twitter