I just finished configure a new mobo/cpu, but I'm having weird random reboots. Here are my specs
Mobo: Asrock 775Dual-VSTA
Cpu: E6600
Ram: 2 x 1GB Cosair Valueselect DDR2-667
1 x Seagate 300Gb
1 x WD 80GB (Main Drive)
1 x Pioneer DVDRW
PSU: Enermax 300Watts
I've been running some burn in test to see if it was the cpu overheating. But it doesn't seem to be the case. I have stress program running at the same time (because 1 program will not max out both core) and the program also test out the physical memory as well.
Got both cpu to max out for around 30 mins and available physical memory to minial, but still could not duplicate the reboot
These reboots are just random reboots, no BSOD or warning messages
So I am suspecting it could be a power issue? but when it's under such heavy load the voltage seems stable. It can't be an overheating issue since the max temp been around 47C.
So I don't know what to troubleshoot this one...
1 more note to add is that I've been having weird IDE issue with this motherboard, as sometimes when I do a manual restart from windows. After it completely quit out of windows and getting ready to POST. The system would go completely dead, the system is still on. However, no screen, response... In order to fix his, I have to open the case up and unplug the cable connected to IDE1, then reconnect to it.
I searched on this forum around and it seems like it may be a board issue or something is not grounded properly ?
Anybody have a clue ???
http://reliant-web.net/burnin.JPG
Mobo: Asrock 775Dual-VSTA
Cpu: E6600
Ram: 2 x 1GB Cosair Valueselect DDR2-667
1 x Seagate 300Gb
1 x WD 80GB (Main Drive)
1 x Pioneer DVDRW
PSU: Enermax 300Watts
I've been running some burn in test to see if it was the cpu overheating. But it doesn't seem to be the case. I have stress program running at the same time (because 1 program will not max out both core) and the program also test out the physical memory as well.
Got both cpu to max out for around 30 mins and available physical memory to minial, but still could not duplicate the reboot
These reboots are just random reboots, no BSOD or warning messages
So I am suspecting it could be a power issue? but when it's under such heavy load the voltage seems stable. It can't be an overheating issue since the max temp been around 47C.
So I don't know what to troubleshoot this one...
1 more note to add is that I've been having weird IDE issue with this motherboard, as sometimes when I do a manual restart from windows. After it completely quit out of windows and getting ready to POST. The system would go completely dead, the system is still on. However, no screen, response... In order to fix his, I have to open the case up and unplug the cable connected to IDE1, then reconnect to it.
I searched on this forum around and it seems like it may be a board issue or something is not grounded properly ?
Anybody have a clue ???
http://reliant-web.net/burnin.JPG